Instruction Manual

Product description
Overview of control terminals
3

24
EDS84ASC552 EN 9.1
Control terminals for devices in the TopLine version
8400TLC032b
Connection Information
Pos. Description TopLine C
X1 CANopen connection
 213
S1
CANopen settings
Settings for CANopen terminating resistor and axis bus
X3 Analog inputs / outputs; 10 V reference voltage  230
X4
Digital inputs; controller enable
-
24 V supply of the control electronics
Digital outputs
 234

234
24 V voltage ou tput
X5
Digital inputs; controller enable
 233
External 24 V supply of the control electronics; internal 24 V supply, fused
via PTC
X6 (DIAG) Diagnostic interface  221
X7 Resolver  237
X8 Encoder  238
X10 Axis bus  239
X107
24 V brake supply
 236
+BD1
Connection for DC brake coil
-BD2
MMI Slot for memory module (Memory Module Interface)  293
 Icon Description

Long discharge time: All power terminals remain live for a few minutes after mains
disconnection! The duration is given under the warning symbol on the device.

High leakage current: Carry out fixed installation and PE connection according to EN 61800-5-1!

Electrostatic sensitive devices:Beforeworkingonthedevice,thepersonnelmustbefreeof
electrostatic charge!

Hot surface: Risk of burns! Hot surfaces should not be touched without wearing protective
gloves.