Instruction Manual

Diag nostics
Display of operating data, diagnostics
Drive diagnostics via keypad
9
 269
EDS84ASC552 EN 9.1
Parameter Display
C00183 Device state
C00168 Error number
C00051 Actual speed value
C00052 Motor voltage
C00054 Motor current
C00057/1 Maximum torque
C00057/2 Torque at maximum current
C00059 Motor-numberofpolepairs
C00061 Heatsink temperature
C00062 Temp. inside the controller
C00063 Motor temperature
C00064 Device utilisation (I x t) over the last 180 seconds
C00065 Ext. 24-V voltage
C00066 Thermal motor load (I
2
xt)
C00178 Time the controller was enabled (elapsed-time meter)
C00179 Time the mains was switched on (power-on time meter)
Identification data
The parameters listed in the following table which are classified in the »Engineer«
parameter list and the keypad in the category IdentificationController serve to display
the identification data of the controller.
Parameter Display
C00099 Firmware version
C00200 Firmware product type
C00201 Firmware compilation date
C00203/1 ... 9 HW product types
C00204/1 ... 9 HW serial numbers
C00205/1 ... 6 HW descriptions
C00206/1 ... 6 HW ma nufacturing data
C00208/1 ... 6 HW manufacturer
C00209/1 ... 6 HW countries of origin
C00210/1 ... 6 HW version