Owner manual



6.4 Motor voltage filter

Advantages of using a motor supply filter:

• Sinusoidal output voltages to supply electronic devices.

Please note:

• Install the motor supply filter as close as possible to the inverter.

• Select the control mode "V/f characteristic control"

(C006=-0-). The "magnetizing current control" form of control is

not permissible.

• The chopping frequency must be set to 8 kHz (C018 = -4-).

• The inverter is loaded additionally with approximately 10% of the

rated current of the motor supply filter.

• The voltage drop across the motor supply filter at rated current

and rated frequency (f

= 50 Hz) is 7% of the inverter output

voltage.

• The maximum permissible output frequency is 120 Hz.

• With unscreened motor cables it should be tested whether the

system complies with the interference levels required for the CE-

EMC conformity.