Owner manual

48

6.6 RFI filters
Advantage of using a RFI filter:
• Reduction of high-frequent radio interference.
Please note:
• Because of the generation of leakage currents, the RFI filters
must be connected to earth. The RFI filter must always be
connected to earth at first even if you only want to test the
system.
Otherwise, the system is not protected against shock.
• The filters listed in the following can be connected to the 400 V
mains.
If you need filters for mains voltages of 460 V or 480 V, please
contact the factory.
6.6.1 Ratings of RFI filters
The ratings of the RFI filters depend on the mains current which is
permanently applied.
Operation at rated power (factory setting)
Inverter type Rated filter current Order number
8601...8603 8 A EZF3-008A001
8604...8606 16 A EZF3-016A001
8607...8608 25 A EZF3-025A001
8609...8610 36 A EZF3-036A001
8611 50 A EZF3-050A004
8612...8613 80 A EZF3-080A001
8614 110 A EZF3-110A001
8615 180 A EZF3-180A001
Operation at increased power
Inverter type Rated filter current Order number
8601...8603 8 A EZF3-008A00
8604...8606 16 A EZF3-016A001
8607 25 A EZF3-025A001
8608 36 A EZF3-036A001
8609...8610 50 A EZF3-050A004
8611...8612 80 A EZF3-080A001
8613...8614 110 A EZF3-110A001
8615 180 A EZF3-180A001
Operation at maximum power
Inverter type Rated filter current Order number
8601...8602 8 A EZF3-008A001
8603...8604 16 A EZF3-016A001
8606 25 A EZF3-025A001
8608...8609 50 A EZF3-050A004
8610 80 A EZF3-080A001
8612 110 A EZF3-110A001
8613...8614 180 A EZF3-180A001