Owner manual



Planning

1 Features of the 8600 inverter series

Liability

• The information given in these Operating Instructions describe

the features of the products but do not guarantee them.

Power stage

• Large mains voltage range: 3 x 330 to 528V AC or

470 to 740V DC

• Inverter with IGBTs, protected against short circuits

• 4kHz chopper frequency, adjustable up to 16kHz

• Output frequency up to 480Hz,

V/f rated frequency up to 960Hz

• Overload capacity up to 200% rated current for a short time

• Overload monitoring can be set

• Integrated brake transistor, external brake resistors in IP20

enclosure as option

• Connections for DC bus supply

Control stage

• Digital control unit with 16-bit microprocessor

• Simple parameter setting and diagnosis using keypad and two-

line display in German, English, and French language

• Parameter setting during operation

• V/f-characteristic control with linear or square characteristic

• High breakaway torque by magnetizing current control

• Constant speed due to slip compensation

• Speed control using DC tacho or incremental encoder

• Current limitation with V/f lowering for stall-protected operation

• Motor overload monitoring via PTC input or

⋅t-monitoring

• Process control with a maximum of eight steps

• Synchronisation coasting motor due to flying restart circuit

• Serial interface (RS232C/RS485) for external parameter setting

and operation

• Field bus connecting modules as option to be integrated into the

device

Approvals (unit types 8602 to 8611)

• VDE 0160, VDE reg.-no. 86694

• UL 508, file no. 132659