User Manual

6.6
RFI filters
Advantage of using a RFI filter:
l Reduction of high-frequent radio interference.
Please note:
l Because of the generation of leakage currents, the RFI filters
must be connected to earth. The RFI filter must always be
connected to earth at first even if you only want to test the
System.
Otherwise, the System is not protected against shock.
l The filters listed in the following tan be connected to the 400 V
mains.
If you need filters for mains voltages of 460 V or 480 V, please
contact the factory.
6.6.1 Ratings of RFI filters
The ratings of the RFI filters depend on the mains current which is
permanently applied.
Operation at rated power (factory setting)
IController type
IRated filter current lOrder number
I
8601...8603 8A
EZF3-008AOOl
8604...8606
16A EZF3-016AOOl
8607...8608
25A EZF3-025AOOi
_^,.A nm.,.
clc*
EZF3-036AOOl
001 I
c>“l-+
EZF3-050A004
8612...8613 80A
EZF3-08OAOOl
614
110A
EZF3-11 OAOOl
615
180A EZF3-180AOOl
Operation at increased power
Controller type
8601...8603
IRated filter current
8A
Order number
EZF3-OOBAOO
I 6AOOl
8604...8606
16A EZF3-0’
8607 25A
EZF3-0:
8608
36A EZF3-0:
8609...8610
50A EZF3-050A004
8611...8612
80A EZF3-08OAOOl
8613u.8614
1lOA EZF3-11 OAOOl
8615
180A EZFB-180AOOl
Operation at maximum power
Controller type
8601...8602
8604
“VI
608...8609
8610
8612
8613...8614
Rated fllter current Order number
8A
EZF3-008AOOl
16A EZF3-016AOOl
25A EZF3-025AOOl
50A EZF3-050A004
80A EZF3-08OAOOi
1lOA
EZF3-11 OAOOl
180A
EZF3-180AOOl
50