Owner's manual
Table Of Contents
- KHB 13.0003-EN
- Document history
- Contents
- 1 Preface
- 2 Safety instructions
- 3 Technical data
- 4 Electrical installation
- 5 CANopen communication
- 6 Commissioning
- 7 Parameter setting
- 7.1 Loading and saving of parameter sets
- 7.2 Conversion factors ( factor group)
- 7.3 Power stage parameters
- 7.4 Motor adaptation
- 7.5 Speed controller
- 7.6 Position controller ( position control function)
- 7.7 Digital inputs and outputs
- 7.8 Device information
- 7.9 Manufacturer-specific information parameters
- 7.10 Manufacturer-specific driving records
- 8 Device control
- 9 Operating modes
- 10 Appendix
- 11 Index
Safety instructions
General safety instructions
2
10
KHB 13.0003-EN 2.0
2.2 General safety instructions
ƒ These safety instructions are not claimed to be complete. In case of questions and
problems, please contact your Lenze representative.
ƒ At the time of delivery, the drive controller meets the state of the art and basically
ensures safe operation.
ƒ The information given in this manual refers to the specified hardware and software
versions of the modules.
ƒ The drive controller is a source of danger if
– unqualified personnel work with and on the drive controller.
– the drive controller i s used inappropriately.
ƒ The procedural notes and circuit details given in this manual are suggestions and
their transferability to the respective application has to be checked.
ƒ Ensure by appropriate measures that there is no risk of injury or death to persons or
risk of damage to property in the event of a drive controller failure.
ƒ Operate the drive system only when it is in a proper state.
ƒ Retrofittings, modifications or redesigns of the drive controller are basically
prohibited. Lenze must be contacted in all cases.