Owner's manual
Table Of Contents
- KHB 13.0003-EN
- Document history
- Contents
- 1 Preface
- 2 Safety instructions
- 3 Technical data
- 4 Electrical installation
- 5 CANopen communication
- 6 Commissioning
- 7 Parameter setting
- 7.1 Loading and saving of parameter sets
- 7.2 Conversion factors ( factor group)
- 7.3 Power stage parameters
- 7.4 Motor adaptation
- 7.5 Speed controller
- 7.6 Position controller ( position control function)
- 7.7 Digital inputs and outputs
- 7.8 Device information
- 7.9 Manufacturer-specific information parameters
- 7.10 Manufacturer-specific driving records
- 8 Device control
- 9 Operating modes
- 10 Appendix
- 11 Index
Appendix
Index table
10
136
KHB 13.0003-EN 2.0
Characteristics
Possible settingsNameIndex
DescriptionSelectionLenze
2005
h
0 local_output_
function
0
-128 {1} 127
VAR INT8 RW —
Digital output can be
parameterised by the user.
Value Function Active
-128 ... -17 Reserved
-16 Reference set Low
-15 ... -14 Reserved
-13 Stopover Low
-12 Motor
deenergised
Low
-11 Controller error Low
-10 Reserved
-9 Drive in standstill Low
-8 Reserved
-7 Homing active Low
-6 ... -5 Reserved
-4 Setpoint reached Low
-3 Traversing
request is being
processed
Low
-2 Fault
Low
-1 Warning
0 No function
1 Warning High
2 Fault High
3 Traversing
request is being
processed
High
4 Setpoint reached High
5 ... 6 Reserved
7 Homing active High
8 Reserved
9 Drive in standstill High
10 Reserved
11 Controller error High
12 Motor
deenergised
High
13 Stopover
14 ... 15 Reserved
16 Reference set High
17 ... 127 Reserved