Manual

Accessories (overview)
Motor holding brake control modules
Motor holding brake control module E94AZHX0051
9

426
EDS94SPP101 EN 7.1
Terminal data
Terminal X107 Labelling Description
Connection of the motor holding brake
BD1
BD2
+(Lenze:WH)
-(Lenze:BN)
E94AZHX0051: 24 V DC, max. 2.5 A
Observe correct polarity!
+/- Supply voltage for the motor holding brake (18 ... 30 V DC)
Observe correct polarity!
SSP940X107
 Note!
The supply terminals (+/-) are protected against polarity reversal.
The supply s tatus can be reported to the basic device via the error channel.
Further information can be obtained from the documentation of the basic
device.
Terminal data
Conductor cross-section Tightening torque
[mm
2
] [AWG] [Nm] [lb-in]
Single core 0.25 ... 2.5 24 ... 12
0.5 ... 0.6 4.4 ... 5.3
2 conductors
1)
0.25 ... 1.5 24 ... 16
1)
Two conductors of the same cross-section with a twin wire end ferrule