Manual

Accessories (overview)
General accessories
Shield mounting
9

559
EDS94SPP101 EN 7.1
Select the shield mounting according to the cable characteristics.
Lenze system cables EMC clip EMC wire clamp Cable tie
a
[mm
2
]
d
[mm]
EZA...
(spring clip)
E94AZJS003
(C02)
E94AZJS007
(C03)
E94AZJS024
(C04)
EZAMBKBM
(metallic)
standard, shielded
1.0
10.3 • • • - •
1.5 11.6 • • • - •
2.5 13.2 - • • - •
4.0 14.5 - • • • •
6.0 16.5 - - • • •
10 19.6 - - • • •
suitable for trailing
1.0 11.2 • • • - •
1.5 12.3 - • • - •
2.5 14.2 - • • - •
4.0 14.8 - • • • •
6.0 17.5 - - • • •
10 20.5 - - - • •
Tab. 9-6 Cable characteristics of Lenze system cables
a Single-core cross-sections of a Lenze system cable (motor)
Standard design or trailing cable
d Cross-section of Lenze system cable/cable shield
 Tip!
If a shield mounting cannot be used because of thicker cables, in many cases,
an alternative is possible.
Instead of the EMC clip you c an e.g. use the EMC wire clamp E94AZJS003 or the
metallic cable tie EZAMBKBM.