Instructions User Manual

Mechanical installation
Important notes
5

26
BA_CPCx8xx EN 3.0
5 Mechanical installation
5.1 Important notes
The installation must be carried out by qualified, skilled personnel familiar with the
applicable national standards.
Proceed as follows for the mounting:
1. Check that the installation location meets the operating conditions specified in the
technical data.
2. Prepare the control cabinet mounting plate.
– Observe the dimensions and mounting clearances ( 25).
– There must be sufficient space for inserting disks into or ejecting them from the
DVD drive.
– The ventilation slots must not be covered.
3. Screw the device onto the mounting plate.
– The mounting location and the installation material must guarantee a permanent
mechanical connection.
5.2 Mounting steps
Proceed as follows for the mounting:
1. Check that the installation location meets the operating conditions specified in the
technical data ( 22).
2. Prepare the control cabinet mounting plate.
– Observe the dimensions and mounting clearances ( 25).
– There must be sufficient space for inserting disks into or ejecting them from the
DVD drive.
– The ventilation slots must not be covered.
3. Screw the device onto the mounting plate.
– The mounting location and the installation material must guarantee a permanent
mechanical connection.