Instructions User guide

Installation
Mounting steps
Fixing the mounting frame to the support arm
4

30
MA_CSx0xx DE/EN/FR/ES/IT 2.0
With add−on component

1
0

1
3

 
6
4
5
2
1
4
0
4
CS57x0−006
How to proceed:
1. Check support arm system for professional mounting and sufficient
carrying capacity.
– See support arm documentation.
2. Stick the self−adhesive seal  on the adapter plate  on the side with the
threaded bolts.
3. Pull the connecting cables  out of the support arm  and screw the
adapter plate  to the support arm .
– For screws see support arm documentation.
4. Screw the add−on component  to the threaded bolts of the adapter plate
.
– 4 spacer bolts  on the inside/outside M5 x 20 mm
5. Stick the second self−adhesive seal  on the add−on component .
6. Screw the mounting frame  to the add−on component .
– 4 nuts M5 with washers Æ 5.3 mm
– 4 screws M5 x 8 mm with washers Æ 5.3 mm
Now you can connect the Command Station ( 33).