Manual

6 Electrical installation
Wiring to a host
EDK82ZAFPC-201 DE/EN/FR 6.0 58

H2 VerdrahtLeitrechner-PBS_leitungsspezifikation
Basic design of a PROFIBUS network with RS485 cabling without repeater
starttec
8200vector
8200motec
+
E82ZAFPC201
starttec
8200vector
8200motec
+
E82ZAFPC201
starttec
8200vector
8200motec
+
E82ZAFPC201
3 3 3
1
2 2 2
0m
1200m
E82ZAFP005
No. Element Note
1 Host E.g. PC or PLC with PROFIBUS master interface module
2 Bus cable Connects the PROFIBUS master interface module to the function
modules.
 The baud rate depends on the length of the bus cable (  60).
3 PROFIBUS slave Applicable standard device (  49)with function module
 Activate bus terminating resistors at the first and last physical
node (  74).
 Note!
When using a repeater, max. 125 nodes can communicate via the PROFIBUS.