User Manual

Lenze · 8400 StateLine · Operating instructions · from Firmware V06.00 · DMS 1.2 EN · 12/2012 · TD05 43
6 Commissioning
6.3 Adapting the most important parameters to the drive task
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
C00910/1
C00910/2
Max. pos. output frequency
Max. positive output frequency for all motor control modes
Setting range (min. value | unit | max. value) Lenze setting
0 Hz 1000 1000 Hz
Max. neg. output frequency
Max. negative output frequency for all motor control modes
Setting range (min. value | unit | max. value) Lenze setting
0 Hz 1000 1000 Hz