Manual

12 Error messages
12.1 Short overview of the PROFIBUS error messages
91
Lenze · E84AYCPM communication module (PROFIBUS®) · Communication Manual · DMS 5.0 EN · 11/2012 · TD17
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12 Error messages
This chapter supplements the error list contained in the software manual and in the »Engineer«
online help for Inverter Drives 8400 by the error messages of the communication module.
12.1 Short overview of the PROFIBUS error messages
The following table lists all PROFIBUS error messages in numerical order of the error number.
Furthermore the preset error response and – if available – the parameters for setting the error
response are specified.
 Tip!
When you click the cross-reference in the first column, you will see a detailed description
(causes and remedies) of this error message.
 Software manual/online help for Inverter Drives 8400
Here you can find general information on diagnostics & fault analysis and on error
messages.
Error number Error text Error type Adjustable
in
hex dec
(subject area
no.)
dec
(error no.)
0x01bc3100 444 12544 Connection to 8400 standard device lost Error -
0x01bc5531
444 21809 Memory: No access Error -
0x01bc5532
444 21810 Memory: Read error Error -
0x01bc5533
444 21811 Memory: Write error Error -
0x01bc6010
444 24592 Restart after watchdog reset Error -
0x01bc6011
444 24593 Internal error Error -
0x01bc6100
444 24832 Internal error Error -
0x01bc6101
444 24833 Internal error Error -
0x01bc6110
444 24848 Internal error Error -
0x01bc641f
444 25631 Invalid parameter set Error -
0x01bc6420
444 25632 Error: Lenze settings loaded Error -
0x01bc8130
444 33072 Profibus watchdog: Monitoring time elapsed No response C13880/1
0x01bc8131 444 33073 Profibus: Data_Exchange state exited No response C13880/1
0x01bc8132 444 33074 Profibus Watchdog: DP-V1 MSC2 monitoring time
exceeded
No response C13880/2