Instruction Manual

Lenze · Decentralised frequency inverter 8400 motec (EtherNet/IP™ option) · EDS84DMOTEIP EN 2.0 - 10/2013 34
Commissioning
Setting the IP configuration of the Inverter Drive 8400 motec
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
IP address
The IP address is set/changed in C13000
.
The IP address currently used is displayed in C13010/1...4
.
Subnet mask
The subnet mask indicates which part of the IP address is evaluated as net ID or host ID.
Valid subnet masks are defined in accordance with RFC 1878
The subnet mask is set/changed in C13001
.
The subnet mask currently used is displayed in C13011/1...4
.
Gateway address
The gateway address is valid if the network address of the IP address and the gateway address are
identical.
If the gateway address and the IP address are identical or if the address is ’0.0.0.0’, gateway
functionality is not used.
The gateway address is set/changed in C13002
.
The gateway address currently used is displayed in C13012/1...4
.
Example: Display of the IP address 192.168.124.16
Code C13010/1
C13010/2 C13010/3 C13010/4
Value 192 168 124 16
Example: Display of the subnet mask 255.255.255.0
Code C13011/1
C13011/2 C13011/3 C13011/4
Value 255 255 255 0
Example: Display of the gateway address 192.168.124.16
Code C13012/1
C13012/2 C13012/3 C13012/4
Value 192 168 124 16