Instruction Manual

I/O data transfer (implicit messages)
I/O configuration in the »Engineer«
53
Lenze · Decentralised frequency inverter 8400 motec (EtherNet/IP™ option) · EDS84DMOTEIP EN 2.0 - 10/2013
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3. On the Ports tab, the port blocks
MCI_IN and MCI_OUT for the I/O data objects are
shown.
• By clicking the required port, the preconfigured signal combination can be obtained
from the
application variables.
• If you want to complement or change the signal combination, click the
Change
Variable … button.