Owner's manual

EDS94ARNExxxx EN 2.3 - 06/2014 L 59
9400 regenerative power supply module | Parameter setting
Device interface
Device commands
4.1.19 Reset max DC power reg.
This function is available from software version V2.0 onwards!
The C00002
= "61: Reset max DC power reg." device command serves to reset the value
displayed in C00143/2
to zero. At the same time, the time stamp corresponding to this
display value (C00144/2
) is set to the current state of the elapsed-hour meter (= time of
reset). Display of peak power
( 87)
Possible status displays for this device command
Related device commands
Reset max DC power mot.
( 58)
Reset max. line power reg.
( 60)
Status (C00003) Meaning
4031746 Device command in process
3997696 Device command executed successfully
3997697 General fault