Instruction Manual

EDS94TA10010xxxx EN 1.1 - 10/2008 L 17
9400 Technology applications | Actuator – speed
Parameter setting & configuration
Machine parameters
4.2 Machine parameters
O Tip!
In the »Engineer« the most important machine parameters can be adapted to the
machine on the Application parameters tab directly in the topmost Overview
dialog level:
Short overview of machine parameters
The machine parameters describe e.g. the motor end of the mechanics
used.
The setting of the machine parameters in the »Engineer» is carried out on
the Application parameters tab in the dialog level Overview  Drive
interface .
Parameter Lenze setting
Value Unit
C00173 Mains voltage 400/415 V
C00174 Undervoltage (LU) threshold 285 V
C00600 Resp. to DC bus overvoltage Trouble
C02520 Gearbox factor numerator: Motor 1
C02521 Gearbox factor denom: Motor 1
C02527 Motor mounting direction Motor rotating CW
C02570 Position control structure Phase control
C02522 Gearbox factor num.: Pos. enc. 1
C02523 Gearbox factor denom.: Pos. enc. 1
Description of the mechanics (load, tool)
C02528 Traversing range Unlimited
C02524 Feed constant 360.0000 unit
C02525 Unit °
C02526 User-defined unit °
C02533 Time unit s
C00273/1 Motor moment of inertia Motor-dependent kg cm
2
C00273/2 Load moment of inertia 0.00 kg cm
2
M