L-force Drives Ä.M.7ä EDK94AZRP .M.7 Montageanleitung Mounting Instructions Instructions de montage Instrucciones para el montaje Istruzioni per il montaggio 9400 8 ...
Lesen Sie zuerst diese Anleitung und die Dokumentation zum Grundgerät, bevor Sie mit den Arbeiten beginnen! Beachten Sie die enthaltenen Sicherheitshinweise. Please read these instructions and the documentation of the standard device before you start working! Observe the safety instructions given therein! Lire le présent fascicule et la documentation relative à l’appareil de base avant toute manipulation de l’équipement ! Respecter les consignes de sécurité fournies.
Inhalt 1 2 3 4 5 6 i Über diese Dokumentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1 1.2 1.3 1.4 1.5 4 4 5 5 6 Informationen zur Gültigkeit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Zielgruppe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Dokumenthistorie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Verwendete Konventionen . . . . . . .
1 Über diese Dokumentation 1 Über diese Dokumentation 1.1 Informationen zur Gültigkeit Informationen zur Gültigkeit 0Abb. 0Tab. 0 Diese Anleitung ist gültig für ƒ Funk-Entstörfilter E94AZRP0084 ƒ Funk-Entstörfilter E94AZRP0294 1.2 Zielgruppe Diese Dokumentation richtet sich an qualifiziertes Fachpersonal nach IEC 60364.
Über diese Dokumentation Dokumenthistorie 1.3 Dokumenthistorie Materialnummer 1.4 1 Version Beschreibung .M.7 6.0 10/2013 TD15 Ergänzungen i700 13237064 5.0 02/2008 TD29 Überarbeitung .6]ò 4.0 07/2007 TD29 Angaben zur UR-Approbation ergänzt .5eu 3.0 04/2007 TD29 Typenbezeichnungen in der Dokumentation aufgrund neuer Typen konkretisiert und diverses aktualisiert .0M: 2.0 09/2006 TD29 Überarbeitung, 5-sprachig ...[ 1.
1 Über diese Dokumentation 1.
Über diese Dokumentation Verwendete Hinweise 1 Spezielle Sicherheitshinweise und Anwendungshinweise Piktogramm und Signalwort Warnings! Warnings! EDK94AZRP DE/EN/FR/ES/IT 6.0 Bedeutung Sicherheitshinweis oder Anwendungshinweis für den Betrieb nach UL- oder CSA-Anforderungen. Die Maßnahmen sind erforderlich, um die Anforderungen nach UL oder CSA zu erfüllen.
2 Sicherheitshinweise 2 Sicherheitshinweise 2.1 Allgemeine Sicherheitshinweise Allgemeine Sicherheitshinweise Gefahr! Wenn Sie die folgenden grundlegenden Sicherheitsmaßnahmen missachten, kann dies zu schweren Personenschäden und Sachschäden führen: ƒ Lenze-Antriebs- und Automatisierungskomponenten ... ... ausschließlich bestimmungsgemäß verwenden. ... niemals trotz erkennbarer Schäden in Betrieb nehmen. ... niemals technisch verändern. ... niemals unvollständig montiert in Betrieb nehmen. ...
Sicherheitshinweise Restgefahren 2.2 2 Restgefahren Gefahr! Warnings! Warnings! Gefährliche elektrische Spannung Alle Leistungsanschlüsse führen bis zu 3 Minuten nach Netz-Ausschalten gefährliche elektrische Spannung. Mögliche Folgen: ƒ Tod oder schwere Verletzungen beim Berühren der Leistungsanschlüsse. Schutzmaßnahmen: ƒ Vor Arbeiten an den Leistungsanschlüssen Netz abschalten und mindestens 3 Minuten warten. ƒ Prüfen, ob alle Leistungsanschlüsse spannungsfrei sind.
3 Produktbeschreibung 3 Produktbeschreibung 3.1 Lieferumfang Lieferumfang Pos. 3.2 Beschreibung Funk-Entstörfilter E94AZRPxxxx Montageanleitung Übersicht SSP94FF001 Pos. Beschreibung Schutzleiteranschluss X301 Netzanschlussklemme L1 ... L3 X302 Anschlussleitung zum DC Versorgungsmodul 4-adrig Anreihhilfe für Montagesockel 10 Typenschild EDK94AZRP DE/EN/FR/ES/IT 6.
Produktbeschreibung 3 Identifikation 3.3 Identifikation L Type: SSP94NF002 Typenschlüssel E94 A Z R P xxx x Produktreihe Gerätegeneration Zubehör Typ Funk-Entstörfilter für 9400 Power Supply Bemessungsstrom [A] Spannungsklasse 4 = 230 ... 400/500 V 3.
4 Technische Daten 4 Technische Daten 4.1 Allgemeine Daten und Einsatzbedingungen Allgemeine Daten und Einsatzbedingungen Konformität und Approbation Approbation UR UL508 Industrial Control Equipment, Underwriter Laboratories (File-No. E219022) for USA and Canada Angaben zu Netzen Netzformen Mit geerdetem Y-Punkt (TT-/TN-Netze) Betrieb uneingeschränkt erlaubt IT-Netze Max.
Technische Daten Allgemeine Daten und Einsatzbedingungen 4 Umweltbedingungen Klima Lagerung IEC/EN 60721-3-1 1K3 (-25 ... +60 °C) Transport IEC/EN 60721-3-2 2K3 (-25 ... +70 °C) Betrieb IEC/EN 60721-3-3 3K3 (-10 ... +55 °C) Stromreduzierung von +45 ... +55 °C: 2.5 %/°C Aufstellhöhe Verschmutzung 0 ... 4000 m üNN 1000 ... 4000 m üNN: Stromreduzierung 5 %/1000 m EN 61800-5-1 Verschmutzungsgrad 2 Rüttelfestigkeit (9,81 m/s2 = 1 g) Transport IEC/EN 60721-3-2 2M2 EN 61800-2 2 ... 9 Hz: Amplitude 3.
4 Technische Daten 4.2 Bemessungsdaten Bemessungsdaten Netz Spannung Spannungsbereich ULN [V] ULN [V] Frequenzbereich f [Hz] 3/PE AC 230 180 - 0 % ... 264 + 0 % 45 - 0 % ... 65 + 0 % 3/PE AC 400 320 - 0 % ... 440 + 0 % 45 - 0 % ... 65 + 0 % 3/PE AC 500 400 - 0 % ... 550 + 0 % 45 - 0 % ... 65 + 0 % Spannung Freq. Strom [A] Strom [A] [V] [Hz] max. +45° C max. +55° C E94AZRP0084 230/400/500 50/60 8/8/8 6/6/6 3 E94AZRP0294 230/400/500 50/60 29/29/29 21.8/21.8/21.
Technische Daten 4 Mechanische Daten 4.3 Mechanische Daten Verwendung mit 9400 SSP94FF002 Abb. 4-1 Abmessungen [mm] b1 b2 [mm] Masse [kg] E94AZRP0084 360 5 350 5 4.2 E94AZRP0294 430 5 420 5 4.5 EDK94AZRP DE/EN/FR/ES/IT 6.
4 Technische Daten Mechanische Daten Verwendung mit i700 SSP94FF002i7 Abb. 4-2 Abmessungen [mm] b1 b2 [mm] 16 Masse [kg] E94AZRP0084 360 5 350 5 4.2 E94AZRP0294 430 5 420 5 4.5 EDK94AZRP DE/EN/FR/ES/IT 6.
Mechanische Installation Wichtige Hinweise 5 Mechanische Installation 5.1 Wichtige Hinweise 5 ƒ Der Montageort muss den in den Technischen Daten genannten Einsatzbedingungen immer entsprechen ( 12). Ggf. zusätzliche Maßnahmen ergreifen. ƒ Die Montageplatte des Schaltschranks muss folgende Eigenschaften aufweisen: – elektrisch leitfähig – lackfrei ƒ Die mechanischen Verbindungen müssen immer gewährleistet sein. ƒ Eine ungehinderte Luftzirkulation zum Abführen der Wärme muss gewährleistet sein.
5 Mechanische Installation 5.2 Anordnung der Geräte Anordnung der Geräte Verwendung mit 9400 0 1 L1 L2 L3 + ... M 3~ E94AZPxxxxx E94AZPxxxxx E94AZEX100 E94AZxPxxxx +UG -UG M 3~ ... M 3~ E94AZPxxxxx +UG -UG E94AZPxxxxx E94APNExxxx (E94AZPPxxxx) E94AZxPxxxx +UG -UG M 3~ SSP94FF003 Abb.
Mechanische Installation Anordnung der Geräte 5 Verwendung mit i700 M 3~ E70AZEVE001 ... E70ACMS... E70ACMS... L1 L2 L3 M 3~ ... M 3~ E70ACMS... E70ACMS... E70ACPSxxxx4x E94AZxPxxxx +UG -UG M 3~ SSP94FF003 S2 Abb. 5-2 Anordnungsprinzip E94AZxPxxxx E70ACPSxxxx4x E70AZEVE001 EDK94AZRP DE/EN/FR/ES/IT 6.
5 Mechanische Installation 5.3 Befestigungsraster Befestigungsraster Verwendung mit 9400 Wir empfehlen zur Befestigung der Geräte ein M5-Gewindelochraster in die Montageplatte einzubringen. Durch diese Vorbereitung sind die Geräte einfach zu befestigen. Die Gerätegrößen 1, 2, ... n sind so direkt anreihbar. SSP94NF311 Abb.
Mechanische Installation Montageschritte 5.4 5 Montageschritte Verwendung mit 9400 So gehen Sie bei der Montage vor: 1. Bereiten Sie auf der Montageplatte M5-Gewindebohrungen z. B. gemäß dem Befestigungsraster vor. – Nutzen Sie stets alle vorgegebenen Befestigungspunkte. 2. Schrauben Sie das Filter auf die Montageplatte. – Verwenden Sie M5-Kombischrauben oder M5-Innensechskantschrauben mit Unterlegscheibe.
6 Elektrische Installation 6 Elektrische Installation 6.1 Wichtige Hinweise Wichtige Hinweise ƒ Die Installation muss – den in den Technischen Daten genannten Einsatzbedingungen immer entsprechen ( 12). – nach EN 60204-1 ausgeführt werden. ƒ Bei der Auswahl des Leitungstyps beachten: – Die verwendeten Leitungen müssen den geforderten Approbationen am Einsatzort entsprechen (z. B. VDE, UL usw.).
Elektrische Installation Wichtige Hinweise Gefahr! Stop! 6 Gefährliche elektrische Spannung Der Ableitstrom gegen Erde (PE) ist > 3.5 mA AC bzw. > 10 mA DC. Mögliche Folgen: ƒ Tod oder schwere Verletzungen beim Berühren des Gerätes im Fehlerfall. Schutzmaßnahmen: ƒ Die in der EN 61800-5-1 geforderten Maßnahmen umsetzen.
6 Elektrische Installation 6.2 Anschlussplan Anschlussplan Verwendung mit 9400 Standardmontage Montagevariante K1 K1 L1 L2 L3 PE L1 L2 L3 PE F1...F3 + E94AZRPxxxx X302 + L1 L2 L3 X111 X112 L1 L2 L3 PE (GN/YE) L1 L2 L3 X301 X302 1 (BK) 2 (BK) 3 (BK) + E94AZPxxxxx L1 L2 L3 X301 1 (BK) 2 (BK) 3 (BK) PE (GN/YE) E94AZRPxxxx + F1...F3 E94AZPxxxxx + + L1 L2 L3 X111 X112 L1 L2 L3 SSP94FF005 Abb. 6-1 E94AZRPxxxx E94AZPxxxxx F1 ...
Elektrische Installation Anschlussplan 6 Verwendung mit i700 K1 L1 L2 L3 PE X302 X301 L3 L2 L1 E70ACPSxxxx4x E94AZRPxxxx 1 (BK) 2 (BK) 3 (BK) PE (GN/YE) F1...F3 L1 L2 L3 X100 SSP94FF005 S2 Abb. 6-2 Schaltungsprinzip E94AZRPxxxx E70ACPSxxxx4x F1 ... F3 K1 EDK94AZRP DE/EN/FR/ES/IT 6.
6 Elektrische Installation 6.3 Anschlussdaten Anschlussdaten Netz Klemme X301 Beschriftung Beschreibung L1 L2 L3 Anschluss der Netzphasen L1, L2, L3 Anschluss für den netzseitigen Schutzleiter mit Ringkabelschuh M5 SSP94FF006 Klemmendaten max. Leiterquerschnitt Anzugsmoment [mm2] [AWG] [Nm] [lb-in] 10 6 1.2 ... 1.5 10.6 ... 13.3 PH1 E94AZxP0084 E94AZxP0294 PE-Anschlussdaten Anzugsmoment E94AZxP0084 E94AZxP0294 [mm] [Nm] [lb-in] M5 3 26.
Elektrische Installation Montageschritte 6.4 6 Montageschritte Verwendung mit 9400 So schließen Sie das Filter an: 1. Filter-Ausgangsleitung (X302) am Montagesockel des Versorgungsmoduls anschließen. 2. Netzleitung an Klemme X301 anschließen. 3. Netzseitiger Schutzleiter mit Gabel- oder Ringkabelschuh an Schutzleiter-Schraube montieren. – Der PE-Anschluss muss nach EN 61800-5-1 ausgeführt werden. Verwendung mit i700 So schließen Sie das Filter an: 1.
6 28 Elektrische Installation Montageschritte EDK94AZRP DE/EN/FR/ES/IT 6.
Contents 1 2 3 4 5 6 i About this documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 1.1 1.2 1.3 1.4 1.5 Validity information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Target group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Document history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conventions used . . . . . . . . . . .
1 About this documentation 1 About this documentation 1.1 Validity information Validity information 0Fig. 0Tab. 0 These instructions are valid for ƒ RFI filter E94AZRP0084 ƒ RFI filter E94AZRP0294 1.2 Target group This documentation is directed at qualified skilled personnel according to IEC 60364. Qualified skilled personnel are persons who have the required qualifications to carry out all activities involved in installing, mounting, commissioning, and operating the product.
About this documentation Conventions used 1.4 1 Conventions used Type of information Identification Examples/notes Spelling of numbers Decimal separator Point In general, the decimal point is used. For instance: 1234.56 Text Program name »« PC software For example: »Engineer«, »Global Drive Control« (GDC) Page reference Documentation reference Reference to another page with additional information For instance: 16 = see page 16 Icons EDK94AZRP DE/EN/FR/ES/IT 6.
1 About this documentation 1.5 Notes used Notes used The following pictographs and signal words are used in this documentation to indicate dangers and important information: Safety instructions Structure of safety instructions: Danger! (characterises the type and severity of danger) Note (describes the danger and gives information about how to prevent dangerous situations) Pictograph and signal word Meaning Danger! Danger of personal injury through dangerous electrical voltage.
About this documentation Notes used 1 Special safety instructions and application notes Pictograph and signal word Warnings! Warnings! EDK94AZRP DE/EN/FR/ES/IT 6.0 Meaning Safety note or application note for the operation according to UL or CSA requirements. The measures are required to meet the requirements according to UL or CSA.
2 Safety instructions 2 Safety instructions 2.1 General safety information General safety information Danger! Disregarding the following basic safety measures may lead to severe personal injury and damage to material assets! ƒ Lenze drive and automation components ... ... must only be used for the intended purpose. ... must never be operated if damaged. ... must never be subjected to technical modifications. ... must never be operated unless completely assembled. ...
Safety instructions 2 Residual hazards 2.2 Residual hazards Danger! Warnings! Warnings! Dangerous electrical voltage All power terminals remain live for up to three minutes after mains disconnection. Possible consequences: ƒ Death or severe injuries when touching the power terminals. Protective measures: ƒ Switch off the power supply and wait for at least three minutes before working on the power terminals. ƒ Make sure that all power terminals are deenergised.
3 Product description 3 Product description 3.1 Scope of supply Scope of supply Pos. 3.2 Description RFI filter E94AZRPxxxx Mounting Instructions Overview SSP94FF001 Pos. Description Connection of PE conductor X301 Mains terminal L1 ... L3 X302 Connection cable to DC power supply module, four-core Mounting aid for installation backplane 36 Nameplate EDK94AZRP DE/EN/FR/ES/IT 6.
Product description 3 Identification 3.3 Identification L Type: SSP94NF002 Type code E94 A Z R P xxx x Product range Version Accessories Type: RFI filter For 9400 power supply Rated current [A] Voltage class 4 = 230 ... 400/500 V 3.
4 Technical data 4 Technical data 4.1 General data and operating conditions General data and operating conditions Conformity and approval Approval UR UL508 Industrial Control Equipment, Underwriter Laboratories (File-No. E219022) for USA and Canada Mains data Mains types With grounded neutral (TT/TN systems) Operation permitted without restrictions IT systems Max.
Technical data General data and operating conditions 4 Environmental conditions Climate Storage IEC/EN 60721-3-1 1K3 (-25 ... +60 °C) Transport IEC/EN 60721-3-2 2K3 (-25 ... +70 °C) Operation IEC/EN 60721-3-3 3K3 (-10 ... +55 °C) Current derating at +45 ... +55 °C: 2.5 %/°C Site altitude Pollution 0 ... 4000 m amsl 1000 ... 4000 m amsl: current derating of 5 %/1000 m EN 61800-5-1 Pollution degree 2 Vibration resistance (9.81 m/s2 = 1 g) Transport IEC/EN 60721-3-2 2M2 EN 61800-2 2 ...
4 Technical data 4.2 Rated data Rated data Mains Voltage Voltage range ULrated [V] ULrated [V] Frequency range f [Hz] 3/PE AC 230 180 - 0 % ... 264 + 0 % 45 - 0 % ... 65 + 0 % 3/PE AC 400 320 - 0 % ... 440 + 0 % 45 - 0 % ... 65 + 0 % 3/PE AC 500 400 - 0 % ... 550 + 0 % 45 - 0 % ... 65 + 0 % Voltage Freq. Current [A] Current [A] [V] [Hz] max. +45° C max. +55° C E94AZRP0084 230/400/500 50/60 8/8/8 6/6/6 3 E94AZRP0294 230/400/500 50/60 29/29/29 21.8/21.8/21.
Technical data Mechanical data 4.3 4 Mechanical data Use with 9400 SSP94FF002 Fig. 4-1 Dimensions [mm] b1 b2 [mm] Mass [kg] E94AZRP0084 360 5 350 5 4.2 E94AZRP0294 430 5 420 5 4.5 EDK94AZRP DE/EN/FR/ES/IT 6.
4 Technical data Mechanical data Use with i700 SSP94FF002i7 Fig. 4-2 Dimensions [mm] b1 b2 [mm] 42 Mass [kg] E94AZRP0084 360 5 350 5 4.2 E94AZRP0294 430 5 420 5 4.5 EDK94AZRP DE/EN/FR/ES/IT 6.
Mechanical installation Important notes 5 Mechanical installation 5.1 Important notes 5 ƒ The mounting location must always comply with the operating conditions specified in the technical data ( 38). Take additional measures if necessary. ƒ The mounting plate of the control cabinet must have the following properties: – electrically conductive – free of lacquer ƒ The mechanical connections must always be ensured. ƒ A free air circulation must be ensured for dissipating the heat.
5 Mechanical installation 5.2 Arrangement of the devices Arrangement of the devices Use with 9400 0 1 L1 L2 L3 + ... M 3~ E94AZPxxxxx E94AZPxxxxx E94AZEX100 E94AZxPxxxx +UG -UG M 3~ ... M 3~ E94AZPxxxxx +UG -UG E94AZPxxxxx E94APNExxxx (E94AZPPxxxx) E94AZxPxxxx +UG -UG M 3~ SSP94FF003 Fig.
Mechanical installation 5 Arrangement of the devices Use with i700 M 3~ E70AZEVE001 ... E70ACMS... E70ACMS... L1 L2 L3 M 3~ ... M 3~ E70ACMS... E70ACMS... E70ACPSxxxx4x E94AZxPxxxx +UG -UG M 3~ SSP94FF003 S2 Fig. 5-2 Arrangement concept E94AZxPxxxx E70ACPSxxxx4x E70AZEVE001 EDK94AZRP DE/EN/FR/ES/IT 6.
5 Mechanical installation 5.3 Mounting grid Mounting grid Use with 9400 We recommend to provide the mounting plate with a grid pattern of M5 threaded holes for attaching the devices. This preparation enables easy attachment of the devices, and the device sizes 1, 2, ... n can thus be mounted directly adjacent to each other. SSP94NF311 Fig.
Mechanical installation Mounting steps 5.4 5 Mounting steps Use with 9400 Proceed as follows for the installation: 1. Prepare M5 threaded holes on the mounting plate, for instance according to the mounting grid. – Always use all mounting points specified. 2. Screw the filter onto the mounting plate. – Use M5 screw and washer assemblies or M5 hexagon socket screws with washers.
6 Electrical installation 6 Electrical installation 6.1 Important notes Important notes ƒ Installation must – always be in accordance with the operating conditions specified in the Technical data ( 38). – be carried out to EN 60204-1. ƒ Please observe the following when selecting the cable type: – The cables used must comply with the approvals required for the application (e. g. VDE, UL etc.).
Electrical installation Important notes 6 Stop! No device protection if the mains voltage is too high The mains input is not internally fused. Possible consequences: ƒ Destruction of the device if the mains voltage is too high. Protective measures: ƒ Observe the maximally permissible mains voltage. ƒ Fuse the device correctly on the supply side against mains fluctuations and voltage peaks. EDK94AZRP DE/EN/FR/ES/IT 6.
6 Electrical installation 6.2 Connection plan Connection plan Use with 9400 Standard mounting Mounting variant K1 K1 L1 L2 L3 PE L1 L2 L3 PE F1...F3 + E94AZRPxxxx X302 + L1 L2 L3 X111 X112 L1 L2 L3 PE (GN/YE) L1 L2 L3 X301 X302 1 (BK) 2 (BK) 3 (BK) + E94AZPxxxxx L1 L2 L3 X301 1 (BK) 2 (BK) 3 (BK) PE (GN/YE) E94AZRPxxxx + F1...F3 E94AZPxxxxx + + L1 L2 L3 X111 X112 L1 L2 L3 SSP94FF005 Fig. 6-1 E94AZRPxxxx E94AZPxxxxx F1 ...
Electrical installation Connection plan 6 Use with i700 K1 L1 L2 L3 PE X302 X301 L3 L2 L1 E70ACPSxxxx4x PE (GN/YE) E94AZRPxxxx 1 (BK) 2 (BK) 3 (BK) F1...F3 L1 L2 L3 X100 SSP94FF005 S2 Fig. 6-2 Connection concept E94AZRPxxxx E70ACPSxxxx4x F1 ... F3 K1 EDK94AZRP DE/EN/FR/ES/IT 6.
6 Electrical installation 6.3 Connection data Connection data Mains Terminal X301 Labelling Description L1 L2 L3 Connection of the mains phases L1, L2, L3 Connection for the supply-side PE conductor with M5 ring cable lug SSP94FF006 Terminal data Max. conductor cross-section Tightening torque [mm2] [AWG] [Nm] [lb-in] 10 6 1.2 ... 1.5 10.6 ... 13.3 PH1 E94AZxP0084 E94AZxP0294 PE connection data Starting torque E94AZxP0084 E94AZxP0294 [mm] [Nm] [lb-in] M5 3 26.
Electrical installation Mounting steps 6.4 6 Mounting steps Use with 9400 Proceed as follows to connect the filter: 1. Connect the filter output cable (X302) to the installation backplane of the power supply module. 2. Connect the mains cable to terminal X301. 3. Attach the supply-side PE conductor to the protective conductor screw using a fork-type or a ring cable lug. – The PE connection must comply with EN 61800-5-1. Use with i700 How to connect the filter: 1.
6 54 Electrical installation Mounting steps EDK94AZRP DE/EN/FR/ES/IT 6.
Sommaire 1 2 3 4 5 6 i Présentation du document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 1.1 1.2 1.3 1.4 1.5 56 56 56 57 58 Validité . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Public visé . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Historique du document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Présentation du document 1 Présentation du document 1.1 Validité Validité 0Fig. 0Tab. 0 Le présent document s’applique au produits suivants : ƒ Filtre antiparasite E94AZRP0084 ƒ Filtre antiparasite E94AZRP0294 1.2 Public visé Cette documentation s’adresse à un personnel qualifié et habilité conformément à la norme CEI 60364.
Présentation du document Conventions utilisées 1.4 1 Conventions utilisées Type d’information Aperçu Exemples/remarques Représentation des chiffres Séparateur décimal Point Le point décimal est généralement utilisé. Exemple : 1234.56 Mise en évidence de textes spéciaux Nom de programme »« Logiciel pour PC Exemple : »Engineer«, »Global Drive Control« (GDC) Renvoi à la page Renvoi à une documentation Renvoi à une autre page contenant des informations supplémentaires.
1 Présentation du document 1.5 Consignes utilisées Consignes utilisées Pour indiquer des risques et des informations importantes, la présente documentation utilise les mots et pictogrammes suivants : Consignes de sécurité Présentation des consignes de sécurité Danger ! (Le pictogramme indique le type de risque.) Explication (L’explication décrit le risque et les moyens de l’éviter.
Présentation du document Consignes utilisées 1 Consignes de sécurité et d’utilisation spéciales Pictogramme et mot associé Warnings! Warnings! EDK94AZRP DE/EN/FR/ES/IT 6.0 Description Consigne de sécurité ou d’utilisation pour le fonctionnement selon les normes UL ou CSA. Les mesures sont requises pour répondre aux exigences des normes UL ou CSA.
2 Consignes de sécurité 2 Consignes de sécurité 2.1 Consignes générales de sécurité Consignes générales de sécurité Danger ! Le non-respect des consignes fondamentales de sécurité suivantes peut entraîner des blessures et des dommages matériels graves. ƒ Les composants d’entraînement et d’automatisation Lenze ... ... doivent exclusivement être utilisés conformément à leur fonction. ... ne doivent jamais être mis en service si des dommages sont décelés. ...
Consignes de sécurité 2 Dangers résiduels 2.2 Dangers résiduels Danger ! Warnings! Warnings! Tension électrique dangereuse Les raccordements de puissance sont encore sous tension jusqu’à 3 minutes après la coupure réseau. Risques encourus ƒ Mort ou blessures graves en cas de contact accidentel avec les raccordements de puissance. Mesures de protection ƒ Avant toute intervention au niveau des raccordements de puissance, couper l’alimentation et attendre au moins 3 minutes.
3 Description du produit 3 Description du produit 3.1 Equipement livré Equipement livré Pos. 3.2 Description Filtre antiparasite E94AZRPxxxx Instructions de montage Présentation générale SSP94FF001 Pos. Description Raccordement du conducteur de protection X301 Bornes de raccordement réseau L1 ... L3 X302 Câble de raccordement vers le module d’alimentation CC, à 4 fils Dispositif de juxtaposition pour le socle de montage 62 Plaque signalétique EDK94AZRP DE/EN/FR/ES/IT 6.
Description du produit 3 Identification 3.3 Identification L Type: SSP94NF002 Codification des types E94 A Z R P xxx x Série d’appareils Génération d’appareils Accessoires Type de filtre antiparasite Pour 9400 Power Supply Courant nominal [A] Classe de tension 4 = 230 ... 400/500 V 3.
4 Spécifications techniques 4 Spécifications techniques 4.1 Caractéristiques générales et conditions d’utilisation Caractéristiques générales et conditions d’utilisation Conformité et homologation Homologation UR UL508 Industrial Control Equipment, Underwriter Laboratories (File-No. E219022) for USA and Canada Informations sur les réseaux Configurations réseau Avec point Y à la terre (réseaux TT/TN) Utilisation sans restriction Réseaux IT Tension réseau maxi.
Spécifications techniques Caractéristiques générales et conditions d’utilisation 4 Conditions climatiques Température ambiante Stockage CEI/EN 60721-3-1 Classe 1K3 (-25 ... +60 °C) Transport CEI/EN 60721-3-2 Classe 2K3 (-25 ... +70 °C) Fonctionnement CEI/EN 60721-3-3 Classe 3K3 (-10 ... +55 °C) Réduction de courant entre +45 ... +55 °C : 2.5 %/°C Altitude d’implantation Pollution ambiante admissible 0 ... 4000 m au-dessus du niveau de la mer 1000 ...
4 Spécifications techniques 4.2 Caractéristiques assignées Caractéristiques assignées Réseau Tension Plage de tension ULN [V] ULN [V] f [Hz] 3/PE CA 230 180 - 0 % ... 264 + 0 % 45 - 0 % ... 65 + 0 % 3/PE CA 400 320 - 0 % ... 440 + 0 % 45 - 0 % ... 65 + 0 % 3/PE CA 500 400 - 0 % ... 550 + 0 % 45 - 0 % ... 65 + 0 % Tension Plage de fréquence Fréq.
Spécifications techniques Caractéristiques mécaniques 4.3 4 Caractéristiques mécaniques Avec les appareils série 9400 SSP94FF002 Fig.4-1 Encombrements [mm] b1 b2 [mm] Poids [kg] E94AZRP0084 360 5 350 5 4.2 E94AZRP0294 430 5 420 5 4.5 EDK94AZRP DE/EN/FR/ES/IT 6.
4 Spécifications techniques Caractéristiques mécaniques Avec les appareils série i700 SSP94FF002i7 Fig.4-2 Encombrements [mm] b1 b2 [mm] 68 Poids [kg] E94AZRP0084 360 5 350 5 4.2 E94AZRP0294 430 5 420 5 4.5 EDK94AZRP DE/EN/FR/ES/IT 6.
Installation mécanique 5 Remarques importantes 5 Installation mécanique 5.1 Remarques importantes ƒ L’emplacement de montage doit impérativement remplir les conditions d’utilisation décrites dans les spécifications techniques.( 64). Si nécessaire, prendre des mesures complémentaires. ƒ La plaque de montage de l’armoire électrique doit présenter les caractéristiques suivantes : – Conductivité électrique – Pas de vernis ƒ Les liaisons mécaniques doivent toujours être assurées.
5 Installation mécanique 5.2 Disposition des appareils Disposition des appareils Avec les appareils série 9400 0 1 L1 L2 L3 + ... M 3~ E94AZPxxxxx E94AZPxxxxx E94AZEX100 E94AZxPxxxx +UG -UG M 3~ M 3~ ... E94AZPxxxxx +UG -UG E94AZPxxxxx E94APNExxxx (E94AZPPxxxx) E94AZxPxxxx +UG -UG M 3~ SSP94FF003 Fig.
Installation mécanique Disposition des appareils 5 Avec les appareils série i700 M 3~ E70AZEVE001 ... E70ACMS... E70ACMS... L1 L2 L3 M 3~ ... M 3~ E70ACMS... E70ACMS... E70ACPSxxxx4x E94AZxPxxxx +UG -UG M 3~ SSP94FF003 S2 Fig.5-2 Disposition des appareils (principe) E94AZxPxxxx E70ACPSxxxx4x E70AZEVE001 EDK94AZRP DE/EN/FR/ES/IT 6.
5 Installation mécanique 5.3 Grille de fixation Grille de fixation Avec les appareils série 9400 Pour la fixation des appareils, nous recommandons le placement de la grille perforée de trous taraudés M5 sur la plage de montage. Le montage s’en trouve simplifié. Les tailles d’appareil 1, 2 à n peuvent ainsi être directement juxtaposées. SSP94NF311 Fig.
Installation mécanique Opérations de montage 5.4 5 Opérations de montage Avec les appareils série 9400 Ordre des opérations de montage 1. Préparer les trous taraudés M5 sur la plaque de montage selon la grille de fixation par exemple. – Utiliser impérativement tous les points de fixation indiqués. 2. Visser le filtre sur la plaque de montage. – Utiliser des vis cruciformes M5 ou des vis à six pans creux avec rondelle incorporée.
6 Installation électrique 6 Installation électrique 6.1 Remarques importantes Remarques importantes ƒ L’installation doit – toujours respecter les conditions d’utilisation indiquées dans les spécifications techniques ( 64) ; – répondre aux exigences de la norme EN 60204-1. ƒ Lors du choix du type de câble, tenir compte des points suivants : – Les câbles utilisés doivent être conformes aux homologations requises sur le lieu d’utilisation (exemples : VDE, UL, etc.).
Installation électrique 6 Remarques importantes Danger ! Stop ! Tension électrique dangereuse Le courant de fuite vers la terre (PE) est > 3.5 mA CA ou > 10 mA CC.
6 Installation électrique 6.2 Schéma de câblage Schéma de câblage Avec les appareils série 9400 Montage standard Variante de montage K1 K1 L1 L2 L3 PE L1 L2 L3 PE F1...F3 + E94AZRPxxxx X302 + L1 L2 L3 X111 X112 L1 L2 L3 PE (GN/YE) L1 L2 L3 X301 X302 1 (BK) 2 (BK) 3 (BK) + E94AZPxxxxx L1 L2 L3 X301 1 (BK) 2 (BK) 3 (BK) PE (GN/YE) E94AZRPxxxx + F1...F3 E94AZPxxxxx + + L1 L2 L3 X111 X112 L1 L2 L3 SSP94FF005 Fig.6-1 E94AZRPxxxx E94AZPxxxxx F1 ...
Installation électrique Schéma de câblage 6 Avec les appareils série i700 K1 L1 L2 L3 PE X302 X301 L3 L2 L1 E70ACPSxxxx4x PE (GN/YE) E94AZRPxxxx 1 (BK) 2 (BK) 3 (BK) F1...F3 L1 L2 L3 X100 SSP94FF005 S2 Fig.6-2 Principe de câblage E94AZRPxxxx E70ACPSxxxx4x F1 ... F3 K1 EDK94AZRP DE/EN/FR/ES/IT 6.
6 Installation électrique 6.3 Données de raccordement Données de raccordement Réseau d’alimentation Bornier X301 Inscription Description L1 L2 L3 Raccordement des phases réseau L1, L2, L3 Raccordement du conducteur de protection côté réseau avec cosse à oeillet M5 SSP94FF006 Spécifications des bornes Section max. de câble Couple de serrage [mm2] [AWG] [Nm] [lb-in] 10 6 1.2 ... 1.5 10.6 ... 13.
Installation électrique 6 Opérations de montage 6.4 Opérations de montage Avec les appareils série 9400 Pour raccorder le filtre : 1. Raccorder le câble de sortie du filtre (X302) sur le socle de montage du module d’alimentation. 2. Raccorder le câble réseau au bornier X301. 3. Raccorder le conducteur de protection avec cosse à oeillet ou à fourche à la vis PE. – Prévoir impérativement un raccordement PE selon EN 61800-5-1.
6 80 Installation électrique Opérations de montage EDK94AZRP DE/EN/FR/ES/IT 6.
Contenido 1 2 3 4 5 6 i Acerca de esta documentación . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 1.1 1.2 1.3 1.4 1.5 82 82 82 83 84 Información sobre la validez . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Grupo objetivo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Historia del documento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Convenciones utilizadas . . . .
1 Acerca de esta documentación 1 Acerca de esta documentación 1.1 Información sobre la validez Información sobre la validez 0Fig. 0Tab. 0 Este manual es de aplicación para ƒ Filtro RFI E94AZRP0084 ƒ Filtro RFI E94AZRP0294 1.2 Grupo objetivo Esta documentación va dirigida a personal experto y cualificado según IEC 60364.
Acerca de esta documentación Convenciones utilizadas 1.4 1 Convenciones utilizadas Tipo de información Marcación Ejemplos/indicaciones Escritura de números Separación de decimales Punto Por norma general se utiliza el punto para los decimales. Por ejemplo: 1234.
1 Acerca de esta documentación 1.
Instrucciones de seguridad Instrucciones generales de seguridad 2 Instrucciones de seguridad 2.1 Instrucciones generales de seguridad 2 ¡Peligro! Si no se observan las siguientes instrucciones básicas de seguridad, pueden ocasionarse serios daños a personas y materiales: ƒ Los componentes de accionamiento y automatización de Lenze ... ... sólo deben utilizarse de la manera adecuada. ... nunca deben ponerse en funcionamiento si existen daños visibles. ...
2 Instrucciones de seguridad 2.2 Peligros residuales Peligros residuales ¡Peligro! Tensión eléctrica peligrosa Todas las conexiones de potencia conducen una tensión eléctrica peligrosa tras la desconexión de la red durante 3 minutos. Posibles consecuencias: ƒ Muerte o lesiones peligrosas al entrar en contacto con las conexiones de potencia. Medidas de protección: ƒ Antes de realizar cualquier trabajo en las conexiones de potencia, desconecte la red y espere como mínimo 3 minutos.
Descripción del producto Alcance del suministro 3 Descripción del producto 3.1 Alcance del suministro Pos. 3.2 3 Descripción Filtro RFI E94AZRPxxxx Instrucciones para el montaje Vista general SSP94FF001 Pos. Descripción Conexión del conductor de tierra X301 Borne de conexión a red L1 ... L3 X302 Cable de conexión al módulo de alimentación DC de 4 conductores Ayuda para la alineación de la base de montaje Placa de características EDK94AZRP DE/EN/FR/ES/IT 6.
3 Descripción del producto 3.3 Identificación Identificación L Type: SSP94NF002 Código de tipo E94 A Z R P xxx x Serie Generación de productos Accesorios Tipo de filtro RFI para 9400 Power Supply Corriente nominal [A] Clase de voltaje 4 = 230 ... 400/500 V 3.
Datos técnicos 4 Datos generales y condiciones de uso 4 Datos técnicos 4.1 Datos generales y condiciones de uso Conformidad y aprobaciones Approbación UR UL508 Industrial Control Equipment, Underwriter Laboratories (File-No. E219022) for USA and Canada Datos acerca de las redes Formas de redes Con punto Y (Redes TT/TN) puestas a tierra Funcionamiento permitido de forma ilimitada Redes IT ¡Voltaje de red máx.
4 Datos técnicos Datos generales y condiciones de uso Condiciones ambientales Climatología Almacenaje IEC/EN 60721-3-1 1K3 (-25 ... +60 °C) Transporte IEC/EN 60721-3-2 2K3 (-25 ... +70 °C) Funcionamiento IEC/EN 60721-3-3 3K3 (-10 ... +55 °C) Reducción de corriente de +45 ... +55 °C: 2.5 %/°C Altura de montaje Polución 0 ... 4000 m s.n.m. 1000 ... 4000 m s.n.m.
Datos técnicos 4 Datos nominales 4.2 Datos nominales Red Tensión Rango de tensión ULN [V] ULN [V] Rango de frecuencia f [Hz] 3/PE AC 230 180 - 0 % ... 264 + 0 % 45 - 0 % ... 65 + 0 % 3/PE AC 400 320 - 0 % ... 440 + 0 % 45 - 0 % ... 65 + 0 % 3/PE AC 500 400 - 0 % ... 550 + 0 % 45 - 0 % ... 65 + 0 % Voltaje Frec. Corriente [A] Corriente [A] [V] [Hz] máx. +45° C máx. +55° C E94AZRP0084 230/400/500 50/60 8/8/8 6/6/6 3 E94AZRP0294 230/400/500 50/60 29/29/29 21.8/21.
4 Datos técnicos 4.3 Datos mecánicos Datos mecánicos Uso con 9400 SSP94FF002 Fig.4-1 Dimensiones [mm] b1 b2 [mm] 92 Masa [kg] E94AZRP0084 360 5 350 5 4.2 E94AZRP0294 430 5 420 5 4.5 EDK94AZRP DE/EN/FR/ES/IT 6.
Datos técnicos 4 Datos mecánicos Uso con i700 SSP94FF002i7 Fig.4-2 Dimensiones [mm] b1 b2 [mm] Masa [kg] E94AZRP0084 360 5 350 5 4.2 E94AZRP0294 430 5 420 5 4.5 EDK94AZRP DE/EN/FR/ES/IT 6.
5 Instalación mecánica 5 Instalación mecánica 5.1 Indicaciones importantes Indicaciones importantes ƒ El lugar de montaje deberá corresponder siempre a las condiciones de uso indicadas en las características técnicas ( 89). en su caso tomar las medidas oportunas. ƒ La placa de montaje del armario de maniobra deberá cumplir con las características siguientes: – Conductividad eléctrica – libre de pintura ƒ Siempre deberá garantizarse una unión mecánica.
Instalación mecánica Colocación de los equipos 5.2 5 Colocación de los equipos Uso con 9400 0 1 L1 L2 L3 + ... M 3~ E94AZPxxxxx E94AZPxxxxx E94AZEX100 E94AZxPxxxx +UG -UG M 3~ ... M 3~ E94AZPxxxxx +UG -UG E94AZPxxxxx E94APNExxxx (E94AZPPxxxx) E94AZxPxxxx +UG -UG M 3~ SSP94FF003 Fig.
5 Instalación mecánica Colocación de los equipos Uso con i700 M 3~ E70AZEVE001 ... E70ACMS... E70ACMS... L1 L2 L3 M 3~ M 3~ ... E70ACMS... E70ACMS... E70ACPSxxxx4x E94AZxPxxxx +UG -UG M 3~ SSP94FF003 S2 Fig.5-2 Principio de colocación E94AZxPxxxx E70ACPSxxxx4x E70AZEVE001 96 Montaje: instalación supletoria Filtro (conexión a red: abajo, salida: arriba) Módulo de alimentación CC i700 Borne CC i700 (solo para instalación distribuida) EDK94AZRP DE/EN/FR/ES/IT 6.
Instalación mecánica Plantilla de sujeción 5.3 5 Plantilla de sujeción Uso con 9400 Para la fijación de los equipos recomendamos colocar un patrón de taladros roscados M5 en la placa de montaje. Con esta preparación es muy fácil fijar los equipos. De esta forma es posible colocar los tamaños de equipo 1, 2, ... n directamente uno al lado del otro. SSP94NF311 Fig.
5 Instalación mecánica 5.4 Pasos para el montaje Pasos para el montaje Uso con 9400 Para el montaje proceda de la siguiente manera: 1. Prepare en la placa de montaje los taladros roscados M5 según la plantilla de sujeción. – Utilice siempre todos los puntos de fijación preestablecidos. 2. Atornille el filtro en la placa de montaje. – Utilice tornillos de M5 con arandelas incorporadas o tornillos hexagonales de M5 y arandelas.
Instalación eléctrica 6 Indicaciones importantes 6 Instalación eléctrica 6.1 Indicaciones importantes ƒ La instalación debe realizarse siempre – conforme a las condiciones de uso indicadas en las características técnicas ( 89). – según EN 60204-1. ƒ Observar en la selección del tipo de cable: – Los cables utilizados deberán corresponder a las homologaciones exigidas en el lugar de uso (p. ej. VDE, UL, etc.
6 Instalación eléctrica Indicaciones importantes 100 ¡Alto! No hay protección contra voltaje de red demasiado alto. La entrada de red no está asegurada internamente. Posibles consecuencias: ƒ Destrucción del equipo si el voltaje de red es demasiado alto. Medidas de protección: ƒ Observe el voltaje de red máximo permitido. ƒ Asegure el equipo en el lado red de forma adecuada contra oscilaciones de red y picos de tensión. EDK94AZRP DE/EN/FR/ES/IT 6.
Instalación eléctrica Esquema de conexiones 6.2 6 Esquema de conexiones Uso con 9400 Montaje estándar Variante de montaje K1 K1 L1 L2 L3 PE L1 L2 L3 PE F1...F3 + E94AZRPxxxx X302 + L1 L2 L3 X111 X112 L1 L2 L3 PE (GN/YE) L1 L2 L3 X301 X302 1 (BK) 2 (BK) 3 (BK) + E94AZPxxxxx L1 L2 L3 X301 1 (BK) 2 (BK) 3 (BK) PE (GN/YE) E94AZRPxxxx + F1...F3 E94AZPxxxxx + + L1 L2 L3 X111 X112 L1 L2 L3 SSP94FF005 Fig.6-1 SSP94FF005 Principio de conexión E94AZRPxxxx E94AZPxxxxx F1 ...
6 Instalación eléctrica Esquema de conexiones Uso con i700 K1 L1 L2 L3 PE X302 X301 L3 L2 L1 E70ACPSxxxx4x PE (GN/YE) E94AZRPxxxx 1 (BK) 2 (BK) 3 (BK) F1...F3 L1 L2 L3 X100 SSP94FF005 S2 Fig.6-2 Principio de conexión E94AZRPxxxx E70ACPSxxxx4x F1 ... F3 K1 102 Filtro anti-radiación Módulo de alimentación CC i700 Fusibles Contactor de red EDK94AZRP DE/EN/FR/ES/IT 6.
6 Instalación eléctrica Datos de conexión 6.3 Datos de conexión Red Borne X301 Rotulación Descripción L1 L2 L3 Conexión de las fases de red L1, L2, L3 Conexión para el cable de tierra del lado red con terminal de cable anular M5 SSP94FF006 Datos de bornes Sección de cable máx. Par de apriete [mm2] [AWG] [Nm] [lb-in] 10 6 1.2 ... 1.5 10.6 ... 13.3 PH1 E94AZxP0084 E94AZxP0294 Datos de conexión para PE Par de apriete [mm] [Nm] [lb-in] M5 3 26.
6 Instalación eléctrica 6.4 Pasos para el montaje Pasos para el montaje Uso con 9400 Para conectar el filtro proceda de la siguiente manera: 1. Conectar cable de salida del filtro (X302) en la base de montaje del módulo de alimentación. 2. Conectar cable de red al borne X301. 3. Conectar el cable de tierra del lado de red al tornillo de puesta a tierra PE. – La conexión PE se ha de realizar según EN 61800-5-1. Uso con i700 Conecte el filtro de esta forma: 1.
Sommario 1 2 3 4 5 6 i Informazioni sul manuale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 1.1 1.2 1.3 1.4 1.5 Informazioni sulla validità . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A chi è rivolto . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cronologia del documento . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Convenzioni utilizzate . . . . . . . . . .
1 Informazioni sul manuale 1 Informazioni sul manuale 1.1 Informazioni sulla validità Informazioni sulla validità 0Fig. 0Tab. 0 La presente documentazione è valida per ƒ Filtro RFI E94AZRP0084 ƒ Filtro RFI E94AZRP0294 1.2 A chi è rivolto La presente documentazione si rivolge al personale tecnico specializzato secondo la norma IEC 60364.
Informazioni sul manuale 1 Convenzioni utilizzate 1.4 Convenzioni utilizzate Tipo di informazione Convenzione tipografica Esempi/Note Modalità di scrittura dei numeri Separatore decimali Punto Si utilizza in generale il punto come separatore dei decimali. Esempio: 1234.
1 Informazioni sul manuale 1.
Informazioni sul manuale Avvertenze utilizzate 1 Note di sicurezza e istruzioni d’uso speciali Simbolo e parola di segnalazione Warnings! Warnings! EDK94AZRP DE/EN/FR/ES/IT 6.0 Significato Nota di sicurezza o istruzioni d’uso per il funzionamento secondo i requisiti UL o CSA. Le misure sono necessarie per soddisfare i requisiti della normativa UL o CSA.
2 Informazioni sulla sicurezza 2 Informazioni sulla sicurezza 2.1 Note generali di sicurezza Note generali di sicurezza Pericolo! La mancata osservanza delle seguenti misure fondamentali di sicurezza può provocare gravi danni a persone e cose.
Informazioni sulla sicurezza 2 Altri pericoli 2.2 Altri pericoli Pericolo! Warnings! Warnings! Tensione elettrica pericolosa Tutti i collegamenti di potenza presentano una tensione elettrica pericolosa fino a 3 minuti dopo la disinserzione dalla rete. Possibili conseguenze: ƒ Morte o gravi lesioni in caso di contatto con i collegamenti di potenza. Misure di protezione: ƒ Attendere almeno 3 minuti prima di eseguire qualsiasi intervento sui collegamenti di potenza.
3 Descrizione del prodotto 3 Descrizione del prodotto 3.1 Oggetto della fornitura Oggetto della fornitura Pos. 3.2 Descrizione Filtro RFI E94AZRPxxxx Istruzioni di montaggio Panoramica SSP94FF001 Pos. Descrizione Collegamento conduttore di protezione X301 Morsetto di collegamento alla rete L1 ... L3 X302 Cavo di collegamento al modulo alimentatore DC a quattro conduttori Guida per base di montaggio 112 Targhetta EDK94AZRP DE/EN/FR/ES/IT 6.
Descrizione del prodotto 3 Identificazione 3.3 Identificazione L Type: SSP94NF002 Codice di identificazione E94 A Z R P xxx x Serie prodotto Versione Accessori Tipo filtro RFI Per modulo alimentatore DC 9400 Corrente nominale [A] Classe di tensione 4 = 230 ... 400/500 V 3.
4 Dati tecnici 4 Dati tecnici 4.1 Dati generali e condizioni di impiego Dati generali e condizioni di impiego Conformità e omologazione Omologazione UR UL508 Industrial Control Equipment, Underwriter Laboratories (File-No. E219022) for USA and Canada Dati relativi alle reti Tipi di rete Con neutro collegato a terra (reti TT/TN) Funzionamento consentito senza limitazioni Reti IT Max.
Dati tecnici 4 Dati generali e condizioni di impiego Condizioni ambientali Clima Stoccaggio IEC/EN 60721-3-1 1K3 (-25 ... +60 °C) Trasporto IEC/EN 60721-3-2 2K3 (-25 ... +70 °C) Funzionamento IEC/EN 60721-3-3 3K3 (-10 ... +55 °C) Riduzione di corrente da +45 a +55 °C: 2.5 %/°C Altitudine di installazione Inquinamento 0 ... 4000 m s.l.m. 1000 ... 4000 m s.l.m.
4 Dati tecnici 4.2 Dati nominali Dati nominali Rete Tensione Campo di tensione ULN [V] ULN [V] Campo di frequenza f [Hz] 3/PE AC 230 180 - 0 % ... 264 + 0 % 45 - 0 % ... 65 + 0 % 3/PE AC 400 320 - 0 % ... 440 + 0 % 45 - 0 % ... 65 + 0 % 3/PE AC 500 400 - 0 % ... 550 + 0 % 45 - 0 % ... 65 + 0 % Tensione Freq. Corrente [A] Corrente [A] [V] [Hz] max. +45° C max. +55° C E94AZRP0084 230/400/500 50/60 8/8/8 6/6/6 3 E94AZRP0294 230/400/500 50/60 29/29/29 21.8/21.8/21.
Dati tecnici Dati meccanici 4.3 4 Dati meccanici Utilizzo con 9400 SSP94FF002 Fig.4-1 Dimensioni [mm] b1 b2 [mm] Peso [kg] E94AZRP0084 360 5 350 5 4.2 E94AZRP0294 430 5 420 5 4.5 EDK94AZRP DE/EN/FR/ES/IT 6.
4 Dati tecnici Dati meccanici Utilizzo con i700 SSP94FF002i7 Fig.4-2 Dimensioni [mm] b1 b2 [mm] 118 Peso [kg] E94AZRP0084 360 5 350 5 4.2 E94AZRP0294 430 5 420 5 4.5 EDK94AZRP DE/EN/FR/ES/IT 6.
Installazione meccanica Note importanti 5 Installazione meccanica 5.1 Note importanti 5 ƒ Il luogo di montaggio deve essere sempre conforme alle condizioni di impiego riportate nei dati tecnici ( 114). Se necessario, adottare misure aggiuntive. ƒ La piastra di montaggio dell’armadio elettrico deve presentare le seguenti caratteristiche: – elettricamente conduttiva – senza verniciatura. ƒ I collegamenti meccanici devono sempre essere garantiti.
5 Installazione meccanica 5.2 Disposizione delle apparecchiature Disposizione delle apparecchiature Utilizzo con 9400 0 1 L1 L2 L3 + ... M 3~ E94AZPxxxxx E94AZPxxxxx E94AZEX100 E94AZxPxxxx +UG -UG M 3~ ... M 3~ E94AZPxxxxx +UG -UG E94AZPxxxxx E94APNExxxx (E94AZPPxxxx) E94AZxPxxxx +UG -UG M 3~ SSP94FF003 Fig.
Installazione meccanica Disposizione delle apparecchiature 5 Utilizzo con i700 M 3~ E70AZEVE001 ... E70ACMS... E70ACMS... L1 L2 L3 M 3~ ... M 3~ E70ACMS... E70ACMS... E70ACPSxxxx4x E94AZxPxxxx +UG -UG M 3~ SSP94FF003 S2 Fig.5-2 Principio di assegnazione E94AZxPxxxx E70ACPSxxxx4x E70AZEVE001 EDK94AZRP DE/EN/FR/ES/IT 6.
5 Installazione meccanica 5.3 Griglia di fissaggio Griglia di fissaggio Utilizzo con 9400 Raccomandiamo di preparare la piastra di montaggio riportando la griglia dei fori di fissaggio M5 dell’apparecchiatura. In tal modo sarà più semplice fissare i dispositivi. Le taglie 1, 2, ... n possono così essere installate una dietro l’altra. SSP94NF311 Fig.
Installazione meccanica Procedura di montaggio 5.4 5 Procedura di montaggio Utilizzo con 9400 Per il montaggio, procedere come segue: 1. Eseguire i fori filettati M5 sulla piastra di montaggio, in base alla griglia di fissaggio. – Utilizzare sempre tutti i punti di fissaggio prestabiliti. 2. Avvitare il filtro alla piastra di montaggio. – Utilizzare viti M5 con rondella o viti ad esagono incassato M5 con rondella.
6 Installazione elettrica 6 Installazione elettrica 6.1 Note importanti Note importanti ƒ L’installazione deve – essere sempre conforme alle condizioni di impiego riportate nei dati tecnici ( 114). – essere eseguita secondo la normativa EN 60204-1. ƒ Nella selezione del tipo di cavo osservare quanto segue: – I cavi utilizzati devono essere conformi alle omologazioni richieste nel luogo di installazione (ad es. VDE, UL, ecc.).
Installazione elettrica 6 Note importanti Pericolo! Stop! Tensione elettrica pericolosa La corrente dispersa verso terra (PE) è > 3.5 mA CA o > 10 mA DC. Possibili conseguenze: ƒ Morte o gravi lesioni in caso di contatto con il modulo guasto. Misure di protezione: ƒ Adottare le misure richieste ai sensi della normativa EN 61800-5-1.
6 Installazione elettrica 6.2 Schema di collegamento Schema di collegamento Utilizzo con 9400 Montaggio standard Variante di montaggio K1 K1 L1 L2 L3 PE L1 L2 L3 PE F1...F3 + E94AZRPxxxx X302 + L1 L2 L3 X111 X112 L1 L2 L3 PE (GN/YE) L1 L2 L3 X301 X302 1 (BK) 2 (BK) 3 (BK) + E94AZPxxxxx L1 L2 L3 X301 1 (BK) 2 (BK) 3 (BK) PE (GN/YE) E94AZRPxxxx + F1...F3 E94AZPxxxxx + + L1 L2 L3 X111 X112 L1 L2 L3 SSP94FF005 Fig.6-1 E94AZRPxxxx E94AZPxxxxx F1 ...
Installazione elettrica Schema di collegamento 6 Utilizzo con i700 K1 L1 L2 L3 PE X302 X301 L3 L2 L1 E70ACPSxxxx4x PE (GN/YE) E94AZRPxxxx 1 (BK) 2 (BK) 3 (BK) F1...F3 L1 L2 L3 X100 SSP94FF005 S2 Fig.6-2 Principio di collegamento E94AZRPxxxx E70ACPSxxxx4x F1 ... F3 K1 EDK94AZRP DE/EN/FR/ES/IT 6.
6 Installazione elettrica 6.3 Dati di collegamento Dati di collegamento Rete Morsettiera X301 Siglatura Descrizione L1 L2 L3 Collegamento delle fasi di alimentazione L1, L2, L3 Connessione per il conduttore di protezione (PE) con terminale ad anello M5 SSP94FF006 Dati dei morsetti Sezione max. conduttore Coppia di serraggio [mm2] [AWG] [Nm] [lb-in] 10 6 1.2 ... 1.5 10.6 ... 13.
Installazione elettrica 6 Procedura di montaggio 6.4 Procedura di montaggio Utilizzo con 9400 Per collegare il filtro, procedere come segue: 1. Collegare il cavo di uscita del filtro (X302) alla base di montaggio del modulo alimentatore. 2. Collegare il cavo di alimentazione al morsetto X301. 3. Fissare il conduttore di protezione (PE) con capocorda a forchetta o ad anello all’apposita vite. – Eseguire il collegamento PE in conformità con la norma EN 61800-5-1.
6 130 Installazione elettrica Procedura di montaggio EDK94AZRP DE/EN/FR/ES/IT 6.
© 10/2013 Lenze Automation GmbH Hans-Lenze-Str. 1 D-31855 Aerzen Germany Service Lenze Service GmbH Breslauer Straße 3 D-32699 Extertal Germany +49 (0)51 54 / 82-0 00 80 00 / 24 4 68 77 (24 h helpline) +49 (0)51 54 / 82 - 28 00 Lenze@Lenze.de +49 (0)51 54 / 82-11 12 Service@Lenze.de www.Lenze.com EDK94AZRP .M.7 DE/EN/FR/ES/IT 6.