Engineering tools EASY Starter Application Loader 13448696 Ä.
Contents ________________________________________________________________ 1 1.1 About this documentation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Document history _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 3 2 2.
About this documentation Document history ________________________________________________________________ 1 About this documentation This documentation contains information on how to use the »EASY Starter (Application Loader)« in batch mode. The batch mode enables applications to be downloaded automatically to the desired target systems. 1.1 Document history Version Beschreibung 1.0 10/2013 TD11 First edition 1.1 06/2014 TD11 Licence information supplemented.
Applications Which applications can be used? ________________________________________________________________ 2 Applications Depending on the device series and engineering tool, an application can contain different data (examples: FB interconnection, parameter set, signal flow diagram). Basically, an application is the sum of the data for determining the function of a device 2.1 Which applications can be used? The applications created in the Lenze engineering tool can be exported.
"Batch" mode: Download applications automatically to target systems What is the "Batch" mode? ________________________________________________________________ 3 "Batch" mode: Download applications automatically to target systems 3.1 Note! For using the "Batch" mode, you need a valid "EASY Advanced" licence (or higher) for the Lenze »Engineer« or »PLC Designer« V 3.x. What is the "Batch" mode? The "Batch" mode enables the automatic download of applications to several target devices.
"Batch" mode: Download applications automatically to target systems Structure of the script file ________________________________________________________________ 3.2 Structure of the script file [COMMUNICATION] Baud rate=500 [COMMON] NumberOfDevices=3 ShowProcessing=1 ExitAfterDownload=0 ; setting is optional ; 1 = displays progress window ; 0 = Application loader will be closed after download [DEVICE001] NodeAddress=Lenze OPC Ethernet Server.1 IP=172_31_201_79 ApplicationFileSet="D:\Data\9400.
"Batch" mode: Download applications automatically to target systems Creating a script file: Defining options ________________________________________________________________ Note! Before being processed, a script file is not checked for correctness but processed until the error source has been reached. In case of an incorrect processing, use the log file to analyse and remove errors. 3.3.1 Communication Define the communication settings in the [Communication] section. 3.3.
"Batch" mode: Download applications automatically to target systems Creating a script file: Defining options ________________________________________________________________ Key NodeAddress Parameter The standard setting is printed in bold. It is valid if no parameter is given. Examples Name of the bus server and address of the target system. • Depending on the bus system, different settings are possible.
"Batch" mode: Download applications automatically to target systems Start the "Batch" mode ________________________________________________________________ Key Parameter The standard setting is printed in bold. It is valid if no parameter is given.
"Batch" mode: Download applications automatically to target systems Status information ________________________________________________________________ Syntax of the command line call The following syntax serves to start the »EASY Starter (Application Loader)« in batch mode: Lenze.ApplicationLoader.exe /batch
