Instruction Manual

ETC−MMI−Gateway
Configuring the ETC−MMI gateway
Connection − Setting up connections
6
6.3
6.3.1
l
278
EDSTCXN EN 2.0
6.3 Configuring the ETC−MMI gateway
Via the configuration interface of the ETC−MMI gateway, you can configure
the connections to the control systems and call debug information.
The configuration interface is a separate application (gtwconf.exe), which is
installed with the ETC−MMI gateway. It can be started via the gateway menu
(¶ 277) or as Windows application, e.g. via Windows File Explorer.
6.3.1 Connection − Setting up connections
The "Connections" tab shows the list of the configured connections.
ETCN003
A green LED next to the connection name indicates an active connection, via
which the messages and/or cyclic data are transferred.