Instruction Manual

Getting started

ETC PLC programming with CoDeSys

Configuring the control system in the ETC−CoDeSys

2.11

2.11.2

EDSTCXN EN 2.0

Each module has its own CAN address (node ID). An address consists of the

type−specific basic address and the individually set address at the hex switch

on the front side.

ETCM029

If the HEX switch is set to zero (arrow points to the left) for the fieldbus

modules used, the following resulting node IDs must be entered for the

individual modules:

Module CAN

basic address

Set

at the hex switch

Resulting

node ID

ETCHI0xx 80

dez

0 80

dez

ETCHU0xx 16

dez

0 16

dez

ETCHA022 48

dez

0 48

dez

ETCN023

Enter CAN address