g700 .O10 Ä.O10ä Planetary gearboxes with servo g700−P20 ... g700−P800 | 5 Nm ...
First read this documentation and the documentation of the motor before you start working. Observe the safety instructions contained therein. 0Abb. 0Tab.
Contents 1 2 3 4 5 6 7 i About this documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1 Document history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.2 Conventions used . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.3 Terminology used . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 About this documentation Document history 1 About this documentation Contents ¯ This documentation serves for safety−relevant operations on and with the gearboxes. It contains safety instructions which must be observed. ¯ All personnel working on and with the gearboxes must have the documentation available during the work and observe the information and notes relevant for them. ¯ The documentation must always be complete and in a perfectly readable state.
About this documentation 1 Terminology used 1.3 Terminology used Term Gearboxes In the following text used for Gearbox of the product family g700 Drive system Drive systems with g700 gearboxes and other Lenze drive components 1.
2 Safety instructions General safety instructions for drive components 2 Safety instructions 2.1 General safety instructions for drive components Danger! Disregarding the following basic safety measures may lead to severe personal injury and damage to material assets! ¯ Store in dry, low−vibration environment without aggressive atmosphere; if possible in the manufacturer’s packaging. – Protect against dust and impacts.
Product description 3 Important notes 3 Product description 3.1 Important notes ¯ The most important technical data is given on the nameplate. ¯ The product catalogues contain further technical data. 3.2 Identification 3.2.1 Nameplate Geared motor Note! In the geared motor version the nameplate is attached to the motor. Standard version 1 L 2 3 12 6 Hans-Lenze-Straße 1 D-31855 Aerzen GERMANY 4 19 Made in Germany E210321 15 EN En60034 16.1 16.2 16.3 16.4 10 5.1+5.6 5.2+5.6 5.3+5.7 5.
3 Product description Transport weights Example Example: g700 with motor L 225 V~ 0.25 kW 270 Hz 0.34 HP 1.3 A U in 170 V max. 5.4 A IP 54 i = 5.0 BEM34-132 V Geber Feedback RS E210321 En60034 MCS06C41-RS0B0-A11N-ST5S00N-R0SU n1eto 810 r/min M2 3 Nm M 2,GN 15 Nm n2,th 4050 r/min C86: 1310 Ta 30°C I.CL.F Bremse Brake 3.3 Made in Germany G70AP020MVCL1N 3~MOT EN Hans-Lenze-Straße 1 D-31855 Aerzen GERMANY Id.-Nr.
Mechanical installation 4 Important notes 4 Mechanical installation 4.1 Important notes ¯ Use load carrying equipment for transport! ¯ Before the transport – check that all components are safely mounted, – fasten all transport aids (eye bolts or support plates). ¯ Transport the drive only with means of transport or hoists with a sufficient load capacity. ¯ Ensure secure fastening.
4 Mechanical installation Preparation Important notes 4.3 Preparation Note! Thoroughly remove anticorrosion agents from output shafts and flange faces. 4.4 Mounting 4.4.1 Important notes Stop! Shocks and impacts on the shaft damage the roller bearings. 4.5 EN Electrical connection Danger! Electrical connections must only be carried out by skilled personnel! Note! The notes for the electrical connection can be found in... ¯ in the terminal box (in case of motors with terminal box).
Commissioning and operation 5 Important notes 5 Commissioning and operation 5.1 Important notes Stop! The drive may only be commissioned by skilled personnel! ¯ Take safety measures prior to any operation: – Disconnect the machine from the mains, ensure standstill of the drive system and avoid any machine movement. 5.
6 Maintenance Important notes 6 Maintenance 6.1 Important notes Note! ¯ The gearboxes are lubricated for life. ¯ The mechanical power transmission system is maintenance−free. 6.2 Repair ¯ We recommend that all repairs are carried out by the Lenze customer service. 6.3 Disposal Protect the environment! Packing material can be recycled. Dispose of your separated resources according to the waste disposal regulations or via a waste management company.
Troubleshooting and fault elimination 7 7 Troubleshooting and fault elimination If any malfunctions should occur during operation of the drive system, please check the possible causes using the following table. If the fault cannot be eliminated by one of the listed measures, please contact the Lenze Service.
7 Troubleshooting and fault elimination Fault Irregular running Vibrations Running noises Possible cause Insufficient shielding of motor or resolver cable Drive controller gain too large Insufficiently balanced coupling elements or machine Inadequate alignment of drive train Loose fixing screws Foreign particles inside the motor Bearing damage Remedy Checking shielding and earth connection Adjust the gains of the controllers (see Drive controller operating instructions) Rebalance Realign machine unit
Notes ! EN Lenze ¯ MA 12.0015 ¯ 1.
© 03/2014 | MA 12.0015 | .O10 | 1.0 | TD09 Lenze Drives GmbH Postfach 10 13 52 D−31763 Hameln Germany +49 5154 82−0 +49 5154 82−2800 Lenze@Lenze.com www.Lenze.com Lenze Service GmbH Breslauer Straße 3 D−32699 Extertal Germany 0080002446877 (24 h helpline) +49 5154 82−1396 Service@Lenze.