Owner's manual

2.5 EN - 01/2012 L 151
Industrial PC | Parameter setting & configuration
Parameter reference
Parameters of standard devices
C0208
C0209
C0210
C0211
C0212
C0213
Parameter | Name:
C0208 | UPS: Display light after volt. fail.
Data type: UNSIGNED_8
Index: 24367
d
= 5F2F
h
Selection list (Lenze setting printed in bold) Information
0OFF
1On
; Read access ; Write access  CINH  PLC STOP  No transfer
Parameter | Name:
C0209 | UPS: Number of voltage dips
Data type: UNSIGNED_8
Index: 24366
d
= 5F2E
h
Display range (min. value | unit | max. value)
0 255
; Read access  Write access  CINH  PLC STOP  No transfer
Parameter | Name:
C0210 | UPS: Supply voltage OK
Data type: UNSIGNED_8
Index: 24365
d
= 5F2D
h
Selection list(read only) Information
0No
1Yes
; Read access  Write access  CINH  PLC STOP  No transfer
Parameter | Name:
C0211 | UPS: Voltage failure
Data type: UNSIGNED_8
Index: 24364
d
= 5F2C
h
Selection list(read only) Information
0No
1Yes
; Read access  Write access  CINH  PLC STOP  No transfer
Parameter | Name:
C0212 | UPS: Firmware version
Data type: VISIBLE_STRING
Index: 24363
d
= 5F2B
h
; Read access  Write access  CINH  PLC STOP  No transfer
Parameter | Name:
C0213 | UPS: Buffer time without action
Data type: UNSIGNED_16
Index: 24362
d
= 5F2A
h
The UPS buffers the system without further action. If the voltage dip takes longer than the time set here:
• The PLC is stopped.
• The PLC saves the retain variables, logbook entries and visualisation data (trends and alarms).
•The timer C00214
is started.
Selection list
(Lenze setting printed in bold) Information
00
250 250
500 500
750 750
1000 1000
1250 1250
1500 1500
1750 1750
2000 2000
2250 2250