Designer V2.x User guide

1.3 EN - 07/2012 L 161
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
8200 vector - "LAS_40_INTF_Can_82_Speed" sample project
8.6.5.5 Parameter transfer
The Parameter button selects the visualisation of the parameter FBs.
The mode selected last remains active.
You can use the FBs to...
read individual parameters
write individual parameters
write a fixed parameter list
Area shows the FB for reading parameters.
Area shows the FB for writing a parameter table.
Area shows the FB for writing parameters.
The parameters read can be viewed in the »PLC Designer« on the Blocks tab in the
Parameter transfer directory of FB L_S8V_SDOList.
Read parameters Write parameters
Write parameter table