Designer V2.x User guide

1.3 EN - 07/2012 L 223
PLC Designer V2.x| Lenze Application Samples
Working with the sample projects
ECS/9400/8400 - "LAS_40_INTF_84SL_Speed_94HL_Speed_ECSPosShaft" sample project
 Display field  shows the current speed (Speed Value variable).
 Button selects CW rotation (activates CW direction of rotation).
8.9.3.5 "Homing ECS" mode (homing)
 Button  selects the "ECS homing" mode (homing).
– The active standard setting in the controller is homing mode 8 (travel to positive
limit switch / digital input 2)
 Button  starts the homing.
 Button  stops homing.
 Button sets the home position.
 Button  resets the home position.
– Set reference / Pos Act = 0 unit
 Dialog box  shows the homing status.
 Dialog box  shows the current homing mode (code value).

Select mode

Start Homing:
Start homing
Stop Homing:
Stop homing

Mode status

Current homing
mode (code value)

•CAN status
• Error message
display
• Error reset

Set Home Position:
Set reference
Reset Home Position:
Reset reference

Status
green = reference available