Manual

19
CMVLC401A
Commissioning
8 Drive Registers
8.1 Configuration and Control Registers
Registers #1 through #1099 are reserved for registers that are only available over the network and cannot be accessed
via the drive’s local keypad.
Table 9: Configuration & Control Registers
Code
Number
Parameter Name Default Range of Adjustment Important
C0040 Controller Inhibit 0 0 Controller inhibited
1 Controller enabled
The controller can also be enabled
with the control word C0135
C0043 Fault Reset 0 0 No Action
1 Reset Fault
The fault can also be reset with
the control word C0135
C0046 Frequency Setpoint 0.0 … 500.0 Hz Read only
C0050 Actual Output
Frequency
0.0 … 500.0 Hz Read only
C0068 Operating Status Bit
Word
Bit Description Read only
0-3 The 10th digit of the LECOM fault number is
displayed. Example:
TRIP OH = 5 (LECOM no. = 50)
4-7 Last communication error
0 = No fault
1 = Check sum error
2 = Protocol frame error
3 = Reserved
4 = Invalid code number
5 = Invalid variable
6 = No access permission
7 = Telegram processing interrupted by a new
telegram
15 = General fault
8 Control via LECOM enabled
9 Actual frequency above threshold C17
10 Direction of rotation
0 = CW
1 = CCW
11 Power stage transistors energized
12 Quick STOP active
13 Current Limit
14 Setpoint frequency reached
15 Fault occurred
LECOM Format = VH