Instructions / Assembly

ManualsBrandsLEO ManualsPedestal Sump Pumps1/3 HP Pedestal Pump with Stainless Steel Column and Cast Iron Base

Table Of Contents

Model:LHP250S / LHP375S

WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS

before operating. Failure to follow the safety rules and other basic safety precautions may result

in serious personal injury

If you have any QUESTIONS, PROBLEMS, MISSING PARTS, please call our customer service

department at 833-290-1189 before returning to your retailer

.................................................................

Pages 02-06

.................................................................

Páginas 07-12

................................................................

Pages 13-18

English

Español

Français

LHP250S/LHP375S

infous@leopump.com

16649 W Hardy Rd, Houston, TX 77060

Summary of content (10 pages)

PAGE 1
LHP250S/LHP375S 16649 W Hardy Rd, Houston, TX 77060 infous@leopump.com LHP250S/LHP375S LHP250S/LHP375S Model:LHP250S / LHP375S English ................................................................. Pages 02-06 Español ................................................................. Páginas 07-12 Français ................................................................ Pages 13-18 WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating.
PAGE 2
TECHNICAL SPECIFICATIONS Model: LHP250S Property Specifications Voltage 115V/60Hz Horse Power 1/3HP Amps 3.9A Max. Head (ft.) 16.4 ft. Max. Flow (GPH) 3100@5ft Discharge Size (in.) 1-1/2 in. Power cord length (ft.) 10 ft. PERFORMANCE GPH of water @ Total Ft. Head Model LHP250S 5 ft. 10 ft. 15 ft. 3100 2430 1250 Max. Head 16.4ft Model: LHP375S Property Specifications Voltage 115V/60Hz Horse Power 1/2HP Amps 4.8A Max. Head (ft.) 23 ft. Max.
PAGE 3
SAFETY INFORMATION WARNING This pump motor is not submersible. Do not submerge the motor or allow motor to be exposed to water. Personal injury and/or death from electrical shock could result.  Do not use this unit to pump chemicals, flammable liquids, sewage or corrosive liquids. You could injure yourself and the pump will fail. Pumping these types of liquids voids the warranty. Water and electricity can be dangerous if certain precautions are not adhered to.
PAGE 4
INSTALLATION INSTRUCTIONS 1. a. Insert the float rod through the hole in the switch. b. Carefully slide the rubber grommet onto the float rod. NOTE: Use liquid soap to help slide the grommet on the float rod. c. Slide guide onto the float rod and attach it to the column. d. Thread the float ball onto the float rod. You may need a set of pliers to prevent the rod from turning. e. Move the grommet up or down on the float rod to adjust the “turn on” position of the pump. 2.
PAGE 5
TROUBLESHOOTING Problem The pump does not start or run GFCI Outlet Switch The pump starts and stops too often Grommet Guide Float Rod Column Check Valve Float Ball If the pump runs but moves little or no water Pump does not shut off 16 Possible Cause Corrective Action 1. Pump is not plugged in, switch or breaker is off 2. Check for blown fuses or tripped circuit breakers or tripped GFCI outlets 3. Switch is defective 4. Motor thermal protector tripped 5. Float ball is stuck or obstructed 1.
PAGE 6
PARTS DIAGRAM PARTS LIST Part No.
PAGE 7
LHP250S LHP250S/LHP375S 115V/60Hz 16649 W Hardy Rd, Houston, TX 77060 LHP250S/LHP375S 3.9 A infous@leopump.com LHP250S/LHP375S 5m 196 1 1/2" (in.) 3m LHP250S 1.5 m 3m 4.5 m 196 153 79 6m 5m LHP375S Modelo:LHP250S / LHP375S 115V/60Hz 4.8 A English ................................................................. Pages 02-06 Español ................................................................. Páginas 07-12 Français .............................................................
PAGE 8
ESPECIFICACIONES TÉCNICAS Modelo: LHP250S Propiedad Especificaciones Voltaje 115V/60Hz Caballo de fuerza 1/3 HP Amperios 3.9 A Max. Cabeza(m) 5m Max. Flujo(LPM) 196@1.5m Tamaño de la descarga (in.) 1-1/2 in. Longitud del cable eléctrico (m) 3m LHP250S/LHP375S LHP250S/LHP375S 16649 W Hardy Rd, Houston, TX 77060 infous@leopump.com LHP250S/LHP375S RENDIMIENTO Modelo LHP250S LPM de agua a un total de metros de cabeza 1.5 m 3m 4.5 m 6m 196 153 79 - Max.
PAGE 9
DIAGRAMA DE PIEZAS INFORMACIÓN DE SEGURIDAD ADVERTENCIA Este motor de la bomba no es sumergible. No sumerja el motor o deje el motor esté expuesto al agua. Puede ocasionar lesiones personales o la muerte por electrocución.  No utilice esta unidad para bombear productos químicos, líquidos inflamables, aguas residuales o líquidos corrosivos. Se podría lesionarse y la bomba estropearse. El bombeo de este tipo de líquidos anula la garantía.
PAGE 10
INSTRUCCIONES DE INSTALACIÓN SOLUCIÓN DE PROBLEMAS 1. a. Inserte la varilla del flotador a través del agujero en el interruptor. b. Con cuidado, deslice la arandela de goma en la varilla del flotador. NOTA: Use jabón líquido para ayudar a deslizar la arandela en la varilla del flotador. c. Mueva la guía de la varilla del flotador y adjúntelo a la columna. d. Enrosque el flotador en la varilla del flotador. Es posible que tenga un conjunto de pinzas para evitar que el vástago gire. e.