Users Manual Part 1

7
Charge devices
GETTING STARTED
1
Charge your TYPE-S and LEOMO Motion Sensors (optional).
LEOMO Motion
Sensors x5 in sensor
charger (OPTIONAL)
AdaptEr*
(OPTIONAL)
TYPE-C USB CABLE
(OPTIONAL)
USB Cable
(OPTIONAL)
CHARGING INDICATIONS
TYPE-S
* An AC adapter which outputs 5 VDC, 1.5 A or higher
must be used for charging the TYPE-S and LEOMO
Motion Sensors.
Turn on the TYPE-S
INSERT A SIM
Turn on the TYPE-S by holding down the left hardware button on the side of the
TYPE-S until the TYPE-S powers on.
2
Power button
When the TYPE-S is rst powered on after purchase, it shows a message asking
if you would use a SIM.
To use the TYPE-S as a smartphone, too, outside wi- coverage areas, obtain a
nano SIM and insert it in the TYPE-S SIM/micro SD card slot.
3
Skip this step if you would not use SIM.
Skip to step 5 if the TYPE-S directly shows its standby screen with a LEOMO icon.