Submittal Sheet

* 0.25 GPM minimum flow certified to ASSE 1070
Submittal Data Sheet S-841-LF
April, 2020
1360 Elmwood Avenue, Cranston, RI 02910 USA
Phone: [phone] Fax: [phone]
Email: [e-mail]
Web Site: http://www.leonardvalve.com
Engineer's Approval Job # ________________
Arch/Eng. ____________
Contractor ____________
THERMOSTATIC
MIXING
VALVE
MODEL 170-LF
LEAD FREE THERMOSTATIC
POINT OF USE MIXING VALVE
MODEL 3/8" inlets, 3/8" outlet,
compression connections
MATERIALS:
 Lead Free Bronze body
 Locked temperature adjustment cap (vandal
resistant)
 Copper encapsulated thermostat assembly with
polymer thermoplastic shuttle
 Stainless steel springs
 Integral check valves on hot and cold inlets
 Compression fittings on inlets and outlet
PRESSURE-TEMPERATURE:
 Minimum Flow:0.25 GPM (.95 l/Min)
 Maximum Pressure:125 PSI (8.6 BAR)
 Maximum Hot Water temperature: 200F- (93°C)
 Approach Temperature 5°F (2.8°C) above set point.
 Temperature adjustment range, 90-140ºF (32-60ºC) **
____ BP- Cold water By-Pass (shipped loose)
____ CP- Chrome Plated
____ BRKT- Mounting Bracket (shipped loose)
OPTIONS:
CH
COLD
INLET
HOT
INLET
MIXED OUTLET
INTEGRAL
CHECK
LOCK
SCREW
TEMPERATURE
ADJUSTMENT
CAP
VALVES
LF
ECO-MIX
™
**NOTE: For temperatures outside of this valve’s stated range,
please see our line of bi-metal valves.
50
3.4
19
20
1.4
3.0
11.4
1.7
6.4
.35
5
2.3
8.7
.70
10
3.6
14
2.1
30
4.4
17
5.0
2.8
40
PRESSURE DROP
GPM
l/min
BAR
PSI
MINIMUM
FLOW
0.25
0.95
WARNING: This product can expose you to
chemicals including lead, which is known to the State
of California to cause cancer. For more information, go
to www.P65Warnings.Ca.gov
!
Certifications:
ASSE 1070-2015
CSA B125.70-15
Certified to NSF61 thru the ASSE
1070 testing process
This product is certified to meet Low Lead
requirements of wetted surface area containing less
than 0.25% lead by weight