Install Instructions

Bulletin G-170370
July 2020
1360 Elmwood Avenue, Cranston, RI 02910 USA Phone: [phone] Fax [phone]
Email: [e-mail] Web Site: http://www.leonardvalve.com
TROUBLESHOOTING INSTRUCTIONS
SYMPTOMS REPAIR KIT 170-LF 270-LF 370-LF
Leaking water between valve cover and body.
Leaking water under knob.
GASKET KIT 1/WX 1/WX 1/WX
Valve will not control temperature after cleaning.
REBUILDING KIT R/170 R/270/370 R/270/370
Hot water by-passes into the Cold Water Supply
Cold water by-passes into the Hot Water Supply
CHECKSTOP KIT 4/108 4/220 4/320
RETURN SPRING
CHECK
CHECK CLIP (MODEL 270/270-LF/370/ 370-LF/470 ONLY)
SHUTTLE ASSEMBLY
SHUTTLE O'RING
STEM ASSEMBLY
STEM ASSEMBLY O'RING
COVER O'RING
COVER
RETAINING CLIP
KNOB
SCREW
KNOB SET SCREW
DIAL PLATE
DO NOT REMOVE
SNAP RING ON
STEM - INJURY MAY
OCCUR
170 - BP ONLY
PACKING
PART # 7539
170-LF (3/8”COMP)
ASSE 1070
270-LF (1/2”NPT)
ASSE1017/ASSE 1070
370-LF (3/4”NPT)
ASSE1017/ASSE 1070
1/ WX Gasket Kit
1/ WX Gasket Kit
1/ WX Gasket Kit
Shuttle O-Ring
Stem assembly O-Ring
Cover O-Ring
Shuttle O-Ring
Stem assembly O-Ring
Cover O-Ring
Shuttle O-Ring
Stem assembly O-Ring
Cover O-Ring
R/170 Rebuild Kit
R/270/370 Rebuild Kit R/270/370 Rebuild Kit
Return spring
Shuttle assembly
Shuttle O-Ring
Stem assembly O-Ring
Cover O-Ring
Return spring
Shuttle assembly
Shuttle O-Ring
Stem assembly O-Ring
Cover O-Ring
Return spring
Shuttle assembly
Shuttle O-Ring
Stem assembly O-Ring
Cover O-Ring
4/108 Check valve Kit
4/220 Check valve Kit
4/320 Check valve Kit
2 Check Valves
2 Check Valves
2 Check Clips
2 Check Valves
2 Check Clips
NO RECIRCULATION RECIRCULATION
COLD SUPPLY
TEMPERED FIXTURES
HEAT
TRAP
HOT SUPPLY
COLD SUPPLY
SOURCE
WATER
HOT
BALL VALVE
THERMOMETER
AQUASTAT
CIRCULATOR
C
A
TEMPERED FIXTURES
CHECK VALVE
CHECK VALVE
BALANCE
VALVE
CHECK VALVE
T
HEAT
TRAP
CHECK VALVE
LIMITED WARRANTY
Leonard Valve Company warrants the original purchaser that products manufactured by them (not by others) will be free from defects in materials and workmanship under normal conditions of use, when
properly installed and maintained in accordance with Leonard Valve Company's instructions, for a period of one year from date of shipment. During this period the Leonard Valve Company will at its option repair
or replace any product, or part thereof, which shall be returned, freight prepaid, to the Leonard factory and determined by Leonard to be defective in materials or workmanship. There are no warranties, express or
implied, which extend beyond the description contained herein. There are no implied warranties of merchantability or of fitness for a particular purpose. In no event will Leonard be liable for labor or incidental or
consequential damages. Any alteration or improper installation or use of the product will void this limited warranty.