User manual

Problem Possible cause Remedy
You can hear a constant
beep noise.
The electrical connection is
incorrect.
Disconnect the hob from the
electrical supply. Ask a
qualified electrician to check
the installation.
comes on.
The second phase of the
power supply is missing.
Check if the hob is correctly
connected to the electrical
supply. Remove the fuse,
wait one minute, and insert
the fuse again.
If you cannot find a solution...
If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre. Give the data
from the rating plate. Give also three digit
letter code for the glass ceramic (it is in
the corner of the glass surface) and an
error message that comes on. Make sure,
you operated the hob correctly. If not the
servicing by a service technician or dealer
will not be free of charge, also during the
warranty period. The instructions about
the Service Centre and conditions of
guarantee are in the guarantee booklet.
TECHNICAL DATA
Rating plate
Model LAS6060F PNC 949 492 136 01
Typ 60 HAD 47 AO 220 - 240 V 50 - 60 Hz
Made in Romania
Ser.Nr. ................. 7.0 kW
LEONARD
Cooking zones specification
Cooking zone
Nominal Power (Max heat set‐
ting) [W]
Cooking zone diameter [mm]
Left front 750 / 2200 120 / 210
Left rear 1200 145
Right front 1200 145
Right rear 1500 / 2400 170 / 265
For optimal cooking results use cookware
no larger than the diameter of the cooking
zone.
14 Leonard