Brugsanvisning Gebruiksaanwijzing User Manual Opvaskemaskine Afwasautomaat Dishwasher LI1325X
Leonard INDHOLDSFORTEGNELSE Om sikkerhed Sikkerhedsanvisninger Produktbeskrivelse af apparatet Betjeningspanel Programmer Indstillinger 2 3 5 6 7 7 Før ibrugtagning Daglig brug Råd og tip Vedligeholdelse og rengøring Fejlfinding Teknisk information 9 10 11 12 14 17 Ret til ændringer uden varsel forbeholdes. OM SIKKERHED Læs brugsanvisningen grundigt, før apparatet installeres og tages i brug. Producenten kan ikke drages til ansvar, hvis apparatet installeres forkert og anvendelsen forårsager skade.
Leonard 3 • • • • • • • • • • Apparatets specifikationer må ikke ændres. Driftsvandtrykket (minimum og maksimum) skal være mellem 0.5 (0.05) / 8 (0.8) bar (Mpa) Overhold det maksimale antal af 13 kuverter. Hvis netledningen er beskadiget, skal den af sikkerhedsgrunde udskiftes af producenten, et autoriseret servicecenter eller en tekniker med tilsvarende kvalifikationer. Læg knive og bestik med skarpe spidser i bestikkurven med spidserne vendt nedad eller læg dem vandret.
Leonard netstikket, brug sikring: 13 amp ASTA (BS 1362). Tilslutning, vand • Pas på du ikke beskadiger vandslangerne. • Inden du tilslutter apparatet til nye rør eller rør, som ikke har været i brug i lang tid, skal du lade vandet løbe, indtil det bliver klart. • Kontrollér, at der ikke er nogen utætheder, første gang du bruger apparatet. • Tilløbsslangen har en sikkerhedsventil og en kappe med et indvendigt elkabel. • Opvaskemidler er farlige. Følg sikkerhedsanvisningen på opvaskemidlets emballage.
Leonard 5 PRODUKTBESKRIVELSE AF APPARATET 1 2 11 10 1 2 3 4 5 6 9 Mellemste spulearm Nederste spulearm Filtre Mærkeplade Saltbeholder Udluftning 8 7 4 6 5 7 8 9 10 11 Beholder til afspændingsmiddel Beholder til vaskemiddel Bestikkurv Nederste kurv Øverste kurv 3
Leonard BETJENINGSPANEL 1 5 1 Tænd-/sluk-lampe 2 Programmærke 3 Lamper 2 3 4 4 Startknap 5 Programvælger Lamper Lampe Forløb Opvaskeprogram. Lyser, når opvasketrinnet er i gang. Tørreprogram. Lyser, når tørretrinnet er i gang. Slutlampe. Kontrollampe for salt. Denne lampe er altid slukket, når programmet er i gang.
Leonard 7 PROGRAMMER Program 2) 3) Grad af snavs Type af vask Programtrin Forbrugsværdier 1) Varighed (min) Energi (kWt) Vand (l) Normalt snavset Service og bestik • Forskyl • Opvask 50 °C • Skylninger • Affugtning 195 1.039 11 Normalt snavset Service og bestik • Forskyl • Opvask 65 °C • Skylninger • Affugtning 120 130 1.3 - 1.6 15 - 17 Frisk snavset Service og bestik • Opvask 60 °C eller 65 °C • Skylninger 30 0.
Leonard Blødgøringsanlæg Blødgøringsanlægget fjerner mineraler fra vandforsyningen, som ellers kan have en skadelig virkning på opvaskeresultaterne og på apparatet. Jo højere indholdet af disse mineraler er, desto hårdere er vandet. Vandets hårdhedsgrad måles i modsvarende skalaer. Blødgøringsanlægget skal indstilles efter det lokale vands hårdhedsgrad. Oplysning om vandets hårdhedsgrad fås hos det lokale vandværk.
Leonard 9 op. Efter niveau 10 starter du forfra fra niveau 1. 4. Drej knappen til tænd/sluk-position for at bekræfte indstillingen. FØR IBRUGTAGNING Saltbeholderen PAS PÅ! Brug kun salt beregnet til opvaskemaskiner. Saltet bruges til at gøre blødgøringsanlægget klar til drift og til at sikre gode opvaskeresultater i den daglige brug. Sådan fylder du saltbeholderen 1. Drej hætten på saltbeholderen mod uret og fjern den. 2. Hæld en liter vand i saltbeholderen (kun første gang). 3.
Leonard PAS PÅ! Brug kun afspændingsmiddel beregnet til opvaskemaskiner. 1. Tryk på udløserknappen (D) for at åbne låget (C). 2. Hæld afspændingsmidlet i beholderen (A), indtil væsken når niveauet 'max' for påfyldning. 3. Tør spildt afspændingsmiddel op med en sugende klud, så der ikke dannes for meget skum. 4. Luk lågen. Sørg for, at udløserknappen låses på plads. Påfyld afspændingsmiddel i beholderen til afspændingsmiddel, når indikatorvinduet (E) bliver gennemsigtigt.
Leonard 11 Annullering af program Tryk på Start, og hold den nede, indtil startlampen begynder at blinke. Sørg for, at der er opvaskemiddel i beholderen til opvaskemiddel, inden der startes et nyt program. inden for 5 minutter, slukkes alle kontrollamper. Dette hjælper med at reducere energiforbruget. 1. Sluk for apparatet ved at dreje programknappen, indtil programmærket er ud for tænd-/sluk-lampen. 2. Luk for vandhanen. Programslut Når programmet er slut, tændes lampen.
Leonard Gør følgende, hvis du ønsker at holde op med at bruge multitabletter Gør følgende, inden du starter med at bruge separat opvaskemiddel, salt og afspændingsmiddel. 1. Indstil det højeste niveau for blødgøringsanlæg. 2. Sørg for, at saltbeholderen og beholderen til afspændingsmiddel er fuld. 3. Start det korteste program med en skyllefase. Tilsæt ikke opvaskemiddel, og fyld ikke noget i kurvene. 4. Justér blødgøringsanlægget til det lokale vands hårdhedsgrad, når programmet er slut. 5.
Leonard 13 C B A 1. Drej filteret (B) mod uret, og tag det ud. 2. Tag filteret (C) ud af filteret (B). 3. Tag det flade filter (A) ud. 4. Skyl filtrene. 5. Sørg for, at der ikke er madrester eller snavs i eller omkring bundkarrets kant. 6. Sæt det flade filter (A) på plads. Sørg for, at det sidder korrekt fast under de 2 skinner. 7. Saml filtrene (B) og (C). 8. Sæt filteret (B) på plads i det flade filter (A). Drej det med uret, indtil det klikker på plads.
Leonard Indvendig rengøring PAS PÅ! Hvis filtrene sidder forkert, kan det give dårlige opvaskeresultater og beskadige apparatet. Rengøring af spulearme Fjern ikke spulearmene. Hvis hullerne i spulearmene tilstoppes, kan det tiloversblevne snavs fjernes med en tynd, spids genstand. Udvendig rengøring • Rengør apparatet med en fugtig, blød klud. • Brug kun et neutralt rengøringsmiddel. • Brug ikke slibende midler, skuresvampe eller opløsningsmidler.
Leonard 15 Problem og alarmkode Mulig årsag og løsning Apparatet fyldes ikke med vand. • Slutlampen blinker 1 gang med mellemrum. • Start-lampen blinker kontinuerligt. • Kontrollér, at der åbnet for vandhanen. • Kontrollér, at vandtrykket ikke er for lavt. Kontakt dit lokale vandværk for at få disse oplysninger. • Kontrollér, at vandhanen ikke er tilstoppet. • Sørg for, at filteret i tilløbsslangen ikke er tilstoppet. • Kontrollér, at tilløbsslangen ikke er knækket eller bøjet.
Leonard Opvaske- og tørringsresultaterne er utilfredsstillende Problem Mulig årsag og løsning Dårlig opvask. • Se "Daglig brug", "Nyttige tips og råd" og brochuren til fyldning af kurv. • Brug mere intensive opvaskeprogrammer. Dårlig tørring. • Bordservice har været efterladt for længe i et lukket apparat. • Der er intet afspændingsmiddel, eller der er ikke blevet doseret nok afspændingsmiddel. Indstil beholderen til afspændingsmiddel til et højere niveau.
Leonard 17 Problem Mulig årsag og løsning Lugte i apparatet. • Se "Indvendig rengøring". Kalkaflejringer på bordservice, på karret og på lugens inderside. • Se "Blødgøringsanlægget". Sløvt, affarvet eller krakeleret bordservice. • Sørg for, at det kun er genstande, som kan komme i opvaskemaskine, der bliver vasket i apparatet. • Fyld og tøm kurven forsigtigt. Se brochuren til fyldning af kurvene. • Læg de sarte ting i øverste kurv.
Leonard INHOUDSOPGAVE Veiligheidsinformatie 18 Veiligheidsvoorschriften 19 Beschrijving van het product 21 Bedieningspaneel 22 Programma’s 23 Instellingen 23 Voordat u het apparaat voor de eerste keer gebruikt 25 Dagelijks gebruik Aanwijzingen en tips Onderhoud en reiniging Probleemoplossing Technische informatie 26 27 29 30 34 Wijzigingen voorbehouden. VEILIGHEIDSINFORMATIE Lees zorgvuldig de meegeleverde instructies voor installatie en gebruik van het apparaat.
Leonard 19 door gasten in hotels, motels, bed&breakfasts en andere woonomgevingen. De specificatie van het apparaat mag niet worden veranderd. De waterdruk (minimaal en maximaal) moet liggen tussen 0.5 (0.05) / 8 (0.8) bar (Mpa) Houd rekening met het maximale aantal 13 plaatsen. Als de voedingskabel beschadigd is, moet de fabrikant, een erkende serviceverlener of een gekwalificeerd persoon deze vervangen teneinde gevaarlijke situaties te voorkomen.
Leonard • Zorg dat u de hoofdstekker en kabel niet beschadigt. Indien de voedingskabel moet worden vervangen, dan moet dit gebeuren door onze Klantenservice. • Steek de stekker pas in het stopcontact als de installatie is voltooid. Zorg ervoor dat het netsnoer na installatie bereikbaar is. • Trek niet aan het netsnoer om het apparaat los te koppelen. Trek altijd aan de stekker. • Dit apparaat voldoet aan de EEGrichtlijnen. • Alleen voor VK en Ierland. Het apparaat heeft een stekker van 13 ampère.
Leonard 21 BESCHRIJVING VAN HET PRODUCT 1 2 11 10 1 2 3 4 5 6 9 Bovenste sproeiarm Onderste sproeiarm Filters Typeplaatje Zoutreservoir Luchtopening 8 7 4 6 5 7 8 9 10 11 Glansmiddeldoseerbakje Afwasmiddeldoseerbakje Bestekkorf Onderkorf Bovenkorf 3
Leonard BEDIENINGSPANEEL 1 5 1 Controlelampje Aan/uit 2 Programmawijzer 3 Indicatielampjes 2 3 4 4 Starttoets 5 Programmaknop Indicatielampjes Aanduiding Beschrijving Wasfase. Gaat aan wanneer de wasfase loopt. Droogfase. Gaat aan wanneer de droogfase loopt. Einde-indicatielampje. Zoutindicatielampje. Dit indicatielampje is altijd uit als het programma in werking is.
Leonard 23 PROGRAMMA’S Programma 2) 3) Mate van vervuiling Type belading Programmafasen Normaal bevuild Serviesgoed en bestek Verbruiksgegevens 1) Programmaduur (min) Energie(kWh) Water (l) • Voorspoelen • Wassen 50 °C • Spoelgangen • Drogen 195 1.039 11 Normaal bevuild Serviesgoed en bestek • Voorspoelen • Wassen 65 °C • Spoelgangen • Drogen 120 130 1.3 - 1.6 15 - 17 Pas bevuild Serviesgoed en bestek • Wassen 60 °C of 65 °C • Spoelgangen 30 0.
Leonard Als u het apparaat activeert, staat het meestal in de programmakeuzemodus. Maar als dit niet gebeurt, kunt u de programmakeuzemodus op de volgende manier instellen: Hoe hoger het gehalte van deze mineralen, des te harder is het water. De waterhardheid wordt gemeten in de volgende gelijkwaardige schalen. Houd Start ingedrukt tot het startlampje gaat knipperen.
Leonard 25 indicatielampje. Houd Start ingedrukt tot de indicatielampjes aan gaan en aan/uit en gaan knipperen. • Het knipperen van duidt op het huidig ingestelde niveau, bijv. 5 knipperingen + pauze + 5 knipperingen = niveau 5. 3. Druk herhaaldelijk op de Start-toets om de instelling te wijzigen. Telkens als u op de tknop Start drukt, gaat het niveaunummer omhoog. Na niveau 10 begint u weer bij niveau 1. 4. Draai de knop naar de stand aan/uit om de instelling te bevestigen.
Leonard Het vullen van het glansmiddeldoseerbakje 2. Giet het glansmiddel in het doseervakje (A) tot de vloeistof het niveau 'max' heeft bereikt. 3. Verwijder gemorst glansmiddel met een absorberend doekje om te voorkomen dat er te veel schuim ontstaat. 4. Sluit het deksel. Zorg ervoor dat het ontgrendelknopje op zijn plaats dichtklikt. B E A M AX 4 1 3 2 + - C D LET OP! Gebruik alleen glansmiddel voor afwasautomaten. Vul het glansmiddeldoseerbakje bij wanneer de indicatie (E) helder wordt.
Leonard 27 Een programma instellen en starten Een programma starten 1. Draai de waterkraan open. 2. Sluit de deur van het apparaat. 3. Draai de programmaschakelaar totdat het symbool van het programma dat u wilt instellen is uitgelijnd met het lampje aan/uit. • Het controlelampje aan/uit gaat branden. • Het indicatielampje start begint te knipperen. 4. Druk op Start. • Het programma start en het indicatielampje van de wasfase is aan. • Het indicatielampje aan/uit en het indicatielampje start gaan aan.
Leonard hard en erg hard water raden we het gebruik aan van enkelvoudig vaatwasmiddel (poeder, gel, tabletten zonder extra functies), glansmiddel en zout apart voor optimale reinigings- en droogresultaten. • Vaatwasmiddeltabletten lossen bij korte programma's niet geheel op. Om te voorkomen dat vaatwasmiddelresten op het servies achterblijven, raden we u aan om tabletten enkel bij lange programma's te gebruiken. • Gebruik niet meer dan de juiste hoeveelheid vaatwasmiddel.
Leonard 29 ONDERHOUD EN REINIGING WAARSCHUWING! Schakel het apparaat uit en trek de stekker uit het stopcontact voordat u onderhoudshandelingen verricht. Vuile filters en verstopte sproeiarmen verminderen de wasresultaten. Controleer regelmatig de filters en reinig deze zo nodig. 2. Verwijder de filter (C) uit de filter (B). 3. Verwijder de platte filter (A). De filters reinigen Het filtersystem bestaat uit 3 delen. C 4. Was de filters. B A 1. Draai de filter (B) linksom en verwijder het. 5.
Leonard sproeiarmen hebben verstopt, verwijder deze dan met een smal en puntig voorwerp. Buitenkant reinigen • Maak het apparaat schoon met een vochtige, zachte doek. • Gebruik alleen neutrale schoonmaakmiddelen. • Gebruik geen schuurmiddelen, schuursponsjes of oplosmiddelen. 7. Plaats de filters (B) en (C) terug. 8. Plaats de filter (B) terug in de platte filter (A). Rechtsom draaien tot het vastzit.
Leonard 31 Het merendeel van de problemen die ontstaan kunnen worden opgelost zonder contact op te nemen met een erkend servicecentrum. Probleem en alarmcode Mogelijke oorzaak en oplossing U kunt het apparaat niet activeren. • Zorg dat de stekker in het stopcontact zit. • Zorg dat er geen zekering in de zekeringenkast is doorgebrand. Het programma start niet. • Zorg dat de deur van het apparaat is gesloten. • Druk op Start.
Leonard Probleem en alarmcode Mogelijke oorzaak en oplossing Ratelende / kloppende geluiden vanuit het apparaat. • Het serviesgoed is niet juist in de korven gerangschikt. Raadpleeg de folder voor het laden van de korven. • Zorg ervoor dat de sproeiarmen vrij kunnen ronddraaien. Het apparaat maakt kortsluiting. • De stroomsterkte is onvoldoende om alle tegelijk werkende apparaten van stroom te voorzien.
Leonard 33 Probleem Mogelijke oorzaak en oplossing Het serviesgoed is nat. • Het programma heeft geen droogfase of heeft een droogfase met lage temperatuur. • Het glansmiddeldoseerbakje is leeg. • De kwaliteit van het glansmiddel kan de oorzaak zijn. • De kwaliteit van de multitabletten kan de oorzaak zijn. Probeer een ander merk of activeer het glansmiddeldoseerbakje en gebruik het glansmiddel samen met de multitabletten. De binnenkant van het apparaat is nat. • Dit is geen fout van het apparaat.
Leonard TECHNISCHE INFORMATIE Afmetingen Breedte / hoogte / diepte (mm) 596 / 818 - 898 / 575 Elektrische aansluiting 1) Voltage (V) 220 - 240 Frequentie (Hz) 50 Watertoevoerdruk Min. / max. bar (MPa) 0.5 (0.05) / 8 (0.8) Watertoevoer Koud water of warm water2) max. 60 °C Vermogen Couverts 13 Energieverbruik Modus aan laten (W) 0.50 Energieverbruik Uit-modus (W) 0.50 1) Zie het typeplaatje voor andere waarden.
Leonard 35 CONTENTS Safety information Safety instructions Product description Control panel Programmes Settings 35 36 38 39 40 40 Before first use Daily use Hints and tips Care and cleaning Troubleshooting Technical information 42 43 44 45 47 50 Subject to change without notice. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and use causes injuries and damages.
Leonard • • • • • • • • • • Do not change the specification of this appliance. The operating water pressure (minimum and maximum) must be between 0.5 (0.05) / 8 (0.8) bar (Mpa) Obey the maximum number of 13 place settings. If the supply cord is damaged, it must be replaced by the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Put knives and cutlery with sharp points in the cutlery basket with the points down or in a horizontal position.
Leonard 37 Water connection • Make sure not to cause damage to the water hoses. • Before you connect the appliance to new pipes or pipes not used for a long time, let the water flow until it is clean. • The first time you use the appliance, make sure that there is no leakage. • The water inlet hose has a safety valve and a sheath with an inner mains cable. • Do not drink and play with the water in the appliance. • Do not remove the dishes from the appliance until the programme is completed.
Leonard PRODUCT DESCRIPTION 1 2 11 10 1 2 3 4 5 6 Upper spray arm Lower spray arm Filters Rating plate Salt container Air vent 9 8 7 4 6 5 7 8 9 10 11 Rinse aid dispenser Detergent dispenser Cutlery basket Lower basket Upper basket 3
Leonard 39 CONTROL PANEL 1 5 1 On/off indicator 2 Programme marker 3 Indicators 2 3 4 4 Start button 5 Programme knob Indicators Indicator Description Washing phase. It comes on when the washing phase operates. Drying phase. It comes on when the drying phase operates. End indicator. Salt indicator. It is always off while the programme operates.
Leonard PROGRAMMES Programme 2) 3) Degree of soil Type of load Programme phases Normal soil Crockery and cutlery • • • • Normal soil Crockery and cutlery • • • • Fresh soil Crockery and cutlery • Wash 60 °C or 65 °C • Rinses Consumption values 1) Duration (min) Energy (kWh) Water (l) Prewash Wash 50 °C Rinses Dry 195 1.039 11 Prewash Wash 65 °C Rinses Dry 120 130 1.3 - 1.6 15 - 17 30 0.
Leonard 41 The water softener The water softener removes minerals from the water supply, which would have a detrimental effect on the washing results and on the appliance. The higher the content of these minerals, the harder your water is. Water hardness is measured in equivalent scales. The water softener should be adjusted according to the hardness of the water in your area. Your local water authority can advise you on the hardness of the water in your area.
Leonard increases. After level 10 you will start again from level 1. 4. Turn knob to on/off position to confirm the setting. BEFORE FIRST USE The salt container CAUTION! Only use salt specifically designed for dishwashers. The salt is used to recharge the resin in the water softener and to assure good washing results in the daily use. How to fill the salt container 1. Turn the cap of the salt container counterclockwise and remove it. 2.
Leonard 43 CAUTION! Only use rinse aid specifically designed for dishwashers. 1. Press the release button (D) to open the lid (C). 2. Pour the rinse aid in the dispenser (A) until the liquid reaches the fill level 'max'. 3. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam. 4. Close the lid. Make sure that the release button locks into position. Fill the rinse aid dispenser when the indicator (E) becomes clear.
Leonard door, the appliance continues from the point of interruption. appliance within 5 minutes all indicators goes off. This helps to decrease energy consumption. Cancelling the programme 1. To deactivate the appliance, turn the knob until the programme marker is aligned with the on/off indicator. 2. Close the water tap. Press and hold Start until the start indicator starts to flash. Make sure that there is detergent in the detergent dispenser before you start a new programme.
Leonard 45 What to do if you want to stop using multi-tablets Before you start to use separately detergent, salt and rinse aid do the following procedure. 1. Set the highest level of the water softener. 2. Make sure that the salt and rinse aid containers are full. 3. Start the shortest programme with a rinsing phase. Do not add detergent and do not load the baskets. 4. When the programme is completed, adjust the water softener according to the water hardness in your area. 5.
Leonard C B A 1. Turn the filter (B) counterclockwise and remove it. 2. Remove the filter (C) out of filter (B). 3. Remove the flat filter (A). 4. Wash the filters. 5. Make sure that there are no residues of food or soil in or around the edge of the sump. 6. Put back in place the flat filter (A). Make sure that it is correctly positioned under the 2 guides. 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks.
Leonard 47 Internal cleaning CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance. • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. • If you regularly use short duration programmes, these can leave deposits of grease and limescale inside the appliance. To prevent this, we recommend to run long duration programmes at least 2 times per month.
Leonard Problem and alarm code Possible cause and solution The appliance does not fill with water. • The end indicator flashes 1 time intermittently. • The Start indicator flashes continuously. • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority. • Make sure that the water tap is not clogged. • Make sure that the filter in the inlet hose is not clogged.
Leonard 49 The washing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and basket loading leaflet. • Use more intensive washing programmes. Poor drying results. • Tableware has been left for too long inside a closed appliance. • There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level. • Plastic items may need to be towel dried.
Leonard Problem Possible cause and solution Limescale deposits on the tableware, on the tub and on the inside of the door. • Refer to "The water softener". Dull, discoloured or chipped tableware. • Make sure that only dishwasher-safe items are washed in the appliance. • Load and unload the basket carefully. Refer to basket loading leaflet. • Place delicate items in the upper basket. Refer to "Before first use", "Daily use" or "Hints and tips" for other possible causes.
Leonard 51
100010230-A-302015