Submittal Sheet

ManualsBrandsLeonard ManualsHeating Supplies2" Sweat Eco-Mix Thermostatic Master Mixer (10 to 216 GPM)

THERMOSTATIC

MIXING VALVES

Submittal Data Sheet S-2018-LF

April, 2020

LV-985-SW-LF____

10-216 GPM (37.9-818 l/min)

• Thermostatic Water Mixing Valve with 10

GPM (37.9 l/min) minimum flow capacity

• 2” sweat inlets, 2” sweat outlet (51mm x

51mm)

• Integral combination checkstops with strainers

and wall support

• 125 PSI (8.6 BAR) maximum operating

pressure

• Copper encapsulated thermostatic assembly

with Stainless steel shuttle

• Locking temperature regulating handle

Temperature adjustment range, 95-135ºF (35-

57ºC) **

• Top or bottom supply connections

• Internal parts of Lead-Free bronze, and

stainless steel

• Rough Bronze Finish

OPTIONS

____SUFFIX LWS Less wall support

____SUFFIX BDT Ball valve with dial

thermometer (shipped loose)

Note: CP, chrome plated not available

NOTE: Leonard Valve Company reserves the right of product or design

modification without notice or obligation

*NOTE: A locking temperature regulator set for 120°F (49°C), is

simply a mechanical setting to prevent unauthorized temperature

set point changes. If incoming water is hotter than 150°F (65.5°C),

the temperature of the factory test, the valve may deliver in excess

of 120°F. MUST BE RESET BY THE INSTALLER

PRESSURE DROP

PSI

BAR

GPM

l/min

5045403530252015105

37.9

VALVE

LV-985

3.43.12.82.42.11.71.410.70.3

216205193181168154

139120

9971

818776731685636583

526

454375

269

MIN

FLOW

(0.3)

(0.7)

(1.0)

(1.4)

(1.7)

(2.1)

(2,4)

(2.8)

(3.1)

(3.4)

PRESSURE DROP

PSI(BAR)

220(833)

FLOW RATE

GPM(l/min)

60(227)

80(303)

100(379)

120(454)

140(530)

160(606)

180(681)

200(757)

+NOTE: The valve will maintain temperature with 0.5GPM flow from

the domestic hot water loop when properly installed near the hot water

source with a continuously operating recirculation pump.

NOTE: Sweat inlets & outlet, checks shipped loose

ECO-MIX

™

ASSE 1017 Certified

cUPC Certified

This product is certified to meet Low Lead requirements of

wetted surface area containing less than 0.25% lead by

weight

**NOTE: For temperatures outside of this valve’s stated range, please

see our line of bi-metal valves.

WARNING: This product can expose you to

chemicals including lead, which is known to the

State of California to cause cancer. For more

information, go to www.P65Warnings.Ca.gov

Summary of content (2 pages)

PAGE 1
Submittal Data Sheet S-2018-LF April, 2020 ECO-MIX ™ LV-985-SW-LF____ THERMOSTATIC MIXING VALVES • • • • • • NOTE: Sweat inlets & outlet, checks shipped loose • • • VALVE PRESSURE DROP MIN + FLOW LV-985 10 37.9 5 10 15 20 25 30 35 40 45 50 PSI 0.3 0.7 1 1.4 1.7 2.1 2.4 2.8 3.1 3.4 BAR 71 99 120 139 154 168 181 193 205 216 GPM 269 375 454 526 583 636 685 731 776 818 l/min 220(833) GPM(l/min) FLOW RATE 200(757) 10-216 GPM (37.9-818 l/min) Thermostatic Water Mixing Valve with 10 GPM (37.
PAGE 2
LEONARD  HIGH TEMPERATURE FIXTURES (IF APPLICABLE) TEMPERED FIXTURES (SEE NOTE) RECOMMENDED HOT WATER BYPASS N/C BALL VALVE BALL VALVE T THERMOMETER C CIRCULATOR HOT WATER SOURCE A AQUASTAT HEAT TRAP MIN 24" BALL VALVE CHECK VALVE BALL VALVE OPTIONAL CHECK VALVE, CHECK LOCAL PLUMBING CODES CHECK VALVE BALANCE VALVE CHECK VALVE C COLD SUPPLY HIGH TEMPERATURE RETURN CIRCULATOR CAUTION! All thermostatic water mixing valves have limitations.