User manual
Table Of Contents
- INHOUDSOPGAVE
- VEILIGHEIDSINFORMATIE
- VEILIGHEIDSVOORSCHRIFTEN
- BESCHRIJVING VAN HET PRODUCT
- BEDIENINGSPANEEL
- PROGRAMMA´S
- INSTELLINGEN
- VOORDAT U HET APPARAAT VOOR DE EERSTE KEER GEBRUIKT
- DAGELIJKS GEBRUIK
- AANWIJZINGEN EN TIPS
- ONDERHOUD EN REINIGING
- PROBLEEMOPLOSSING
- TECHNISCHE INFORMATIE
- CONTENTS
- SAFETY INFORMATION
- SAFETY INSTRUCTIONS
- PRODUCT DESCRIPTION
- CONTROL PANEL
- PROGRAMMES
- SETTINGS
- BEFORE FIRST USE
- DAILY USE
- HINTS AND TIPS
- CARE AND CLEANING
- TROUBLESHOOTING
- TECHNICAL INFORMATION
- INHALTSVERZEICHNIS
- SICHERHEITSHINWEISE
- SICHERHEITSANWEISUNGEN
- GERÄTEBESCHREIBUNG
- BEDIENFELD
- PROGRAMME
- EINSTELLUNGEN
- VOR DER ERSTEN INBETRIEBNAHME
- TÄGLICHER GEBRAUCH
- TIPPS UND HINWEISE
- REINIGUNG UND PFLEGE
- FEHLERSUCHE
- TECHNISCHE DATEN

Information for test institutes
To receive the necessary information for
conducting performance tests (e.g.
according to EN60436), send an email to:
info.test@dishwasher-production.com
In your request please include the product
number code (PNC) found on the rating
plate.
For any other questions regarding your
dishwasher please refer to the service
book provided with your appliance.
SETTINGS
Programme selection mode and
user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
Settings available in the user mode:
• The level of water softener according to
the water hardness.
• Activation or deactivation of the
acoustic signal for the end of a
programme.
• Activation or deactivation of AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
flashes.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold the programme button
until the appliance is in programme
selection mode.
How to enter user mode
Make sure the appliance is in programme
selection mode.
To enter the user mode, press and hold
the programme button until the indicator
flashes and the indicators and
are on.
The water softener
The water softener removes minerals from
the water supply, which would have a
negative effect on the washing results and
on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water in
your area. It is important to set the right
level of the water softener to assure good
washing results.
Water hardness
German de‐
grees (°dH)
French de‐
grees (°fH)
mmol/l Clarke de‐
grees
Water softener
level
47 - 50 84 - 90 8.4 - 9.0 58 - 63 10
26 Leonard










