Brochure

2
ASSE 1071
SINGLE EYEWASH OR EYE / FACE WASH
Leonard Thermostatic
Water Mixing Valves
 Controls water temperature to provide
tepid water for emergency showers,
eyewash and eye/face wash units
 DURA-trol
®
bi-metal thermostatic
control
 Locked temperature regulator set for
85°F (29°C)
 High temperature limit stop set for
90°F (32°C)
 Internal cold water by-pass on failure
of hot water supply standard on all
models
 On failure of hot water supply, internal
cold water by-pass delivers cold water
to the emergency xture, minimum of
4 GPM at 30 PSI
 ANSI/ISEA Z358.1-2014 requires
water to emergency equipment
to be “tepid”
 Optional systems with temperature
override protection available
 All systems are factory tested
before shipment
 On failure of cold water supply, hot
water is shut down
 Color coded outlet dial thermometer
to view temperature
 Toll-free technical support
TA-350-LFTA-300-LF TA-300-LF-STSTL-REC
Locked temperature
setting at 85°F (29°C)
DURA-trol
®
solid bi-metal
thermostat not subject to
failure due to rupture or
fatigue
Internal parts of bronze,
brass and stainless steel
Models
TA-300-LF Eye/Face Wash, 1/2” inlets, 1/2” outlet,
2 - 9 GPM (7.6-34 l/min)
TA-350-LF Eye/Face Wash, 3/4” inlets, 3/4” outlet,
2 - 9 GPM (7.6-34 l/min)
TA-300-LF Standard System / TA-350-LF Dual
System with Temperature Override Protection
Selection Guide
Temperature Override Protection (TA-350-LF only)
A redundant thermostatic control valve on the outlet opens on temperature rise
at 90°F (32°C) to introduce cold water and maintain tepid ow to the xture