Operation Manual

1 Radio Status: The Status of Wireless.

2 Radio On/Off: Click the button to enable the wireless function. If you want to use

wireless, click the button ‘Radio On’, and if you don’t want to use wireless, click the

button ‘Radio off’.

3 Network mode: Select one of the following: 11g - Select if all of your wireless

clients are 802.11g. 11b/g - Select if you are using both 802.11b and 802.11g

wireless clients. 11b - Select if all of your wireless clients are 802.11b. 11b/g/n -

Select if you are using a mix of 802.11n, 11g, and 11b wireless clients.

4 Network Name(SSID): Service Set Identifier (SSID) is the name of your wireless

network. You can use more than one SSID , but less than eight. Create a name using

up to 32 characters. The SSID is case-sensitive.

5 Broadcast Network Name(SSID): Enable is the default setting. Choose Enable

to broadcast the SSID across the network. All devices on a network must share the

same SSID (Service Set Identifier) to establish communication. Choose Disable if

you do not wish to broadcast the SSID over the network.

6 BSSID: The value of BSSID.

7 Frequency(Channel): Indicates the channel setting for the Wireless Router. By

default the channel is set to 1. The Channel can be changed to fit the channel setting

for an existing wireless network or to customize the wireless network. If you enable

Auto Channel Scan, this Extension Channel will be grayed out.