Operation Manual

12 IEEE 802.11H: This enables 802.11h operation. 802.11h is a wireless
specification developed to allow implementation of wireless networks in countries that
cannot use the 802.11 standard. This feature should only be enabled if you are in a
country that requires it. Click either Enable or Disable. Default is Disable. only in A
band
13 Country Code: Here you can select the Country Code.
14 WMM: WMM is QoS for your wireless network. Enable this option to improve the
quality of video and voice applications for your wireless clients.
15 WMM Parameters: Click this button, you will see the configuration of the WMM
which appears in another page. In the page, you can configure the parameters of
WMM.
16 Multicast-to-Unicast: Enable – select if allow multicast traffic to pass through the
router from the Internet. Disable – select if not allow.
4.2.3 Security
It is recommended to enable encryption on your wireless router before your wireless
network adapters. Please establish wireless connectivity before enabling encryption.
Your wireless signal may degrade when enabling encryption due to the added
overhead.
1 SSID choice: select the SSID which you want to set its Security Mode.
2 Security Mode: set the security mode at the SSID which you select. There are
nine modes for you to select. Whatever you select, the page will show you what
parameters you configure. Refer to page 60 for more information regarding wireless
security.
16