Operation Manual

2.2 The Rear Panel

The rear panel contains the following features. (Viewed from left to right:)

Rear Panel 1

Wireless antenna, one Unfix antenna.

2. WAN RJ45 port for connecting the router to a cable, DSL modem or

Ethernet.

3. Four LAN 10/100Mbps RJ45 ports for connecting the router to the local

PCs .

4. DC power jack: only use the power adapter supplied with Wireless

Router, use of a different adapter may result in product damage.

5. Factory Default Reset button.

6. WPS Button.Wireless Protected Setup.

7. USB 2.0 port ,Connect USB Printer or USB harddisk,flash drive etc.

There is a way to reset the router's factory defaults:

1. Use the Factory Default Reset button:

A) Turn on the router's power.

B) Press and hold the default reset button, until the system LED lights up(about 5

seconds).

C)Release the reset button and wait for the router to reboot.

Notice: Ensure the router is powered on before it restarts completely.