User's Guide

33

FCC-approved antennas "

The modules are FCC approved for ﬁxed base station for the channels indicated in the tables below. "

If the antenna is mounted at least 25 cm (10 in) from nearby persons, the application is considered a

mobile application. "

Antennas not listed in the table must be tested to comply with FCC Section 15.203 (Unique Antenna

Connectors) and Section 15.247 (Emissions). "

The antennas in the tables below have been approved for use with this module. "

Cable loss is required when using gain antennas as shown in the tables."

RF exposure "

If you are an integrating the emMesh into another product, you must include the

following Caution statement in OEM$product manuals to alert users of FCC RF

exposure compliance: "

CAUTION! To satisfy FCC RF exposure requirements for mobile

transmitting devices, a separation distance of 20 cm or more should

be maintained between the antenna of this device and persons during

device operation. To ensure compliance, operations at closer than this

distance are not recommended. The antenna used for this transmitter

must not be colocated in conjunction with any other antenna or

transmitter."

Antennas

Supplier

Part Number

Gain

External

Pulse Electronics

W1063

3.0 dBi

Internal

AWG24 Wire 85mm

length (1/4 wave

monopole)

3.0 dBi

