Installation Guide

www.lesscare.com
ULTRA-B
TUB DOORS • SHOWER DOORS
INSTALLATION STEPS
13. Slide the Side Anti-water Strip (12) to the Fixed Glass (11),
remove the flapper that interferes with the Guide Rail (10)
NOTE: You can cut the strips to size by using a knife if necessary, do
not cut anti-water strips while they are installed on the glass. You
must take off the anti-water strip cut them as needed and re-install
them. Normally, the strips are pre-cut to the size of the glass door.
See Figure 14 for details.
Figure 14
a
b
11
11
12
12
11
12
19