Installation Guide

EXTREMELY IMPORTANT TECHNICAL MAINTENANCE STEP!

www.lesscare.com

ULTRA-C

TUB DOORS • SHOWER DOORS

EXTREMELY IMPORTANT INSTALLATION & TECHNICAL MAINTENANCE INSTRUCTIONS

1. To avoid the Glass Door hitting a wall during opening and closing, make sure that the

distance between the Glass Stoppers and the wall is not less than 5-1/8" for Stationary

Glass Panel and 3-9/16" for Glass Door. (See Figure 1)

2. Glass Stoppers has to be installed very tight to the Upper Guide Rail and must not

move. Double check if all screws on the Glass Stoppers are tight. Tighten the screws if

necessary. (See Figure 2)

3. Make sure that the distance between the Safety Pin and the Upper Guide Rail is not

over 1/24” (1.0 mm). The distance between the Safety Pin that is set right under the

Upper Guide Rail must be as short as possible. The shortest distance will ensure that

the Glass Door will not shake in the Guide Block during opening and closing. (See

Figure 3)

4. The A-Shape Anti-Water Strip and Side Anti-Water strip must be 1-2 mm longer

than the Glass Door to make sure that the glass corner will not contact the wall direct-

ly.(See Figure 4)

5. Double check front and back surfaces, all sides, and all corners of the Glass Door and

Stationary Glass Panel to make sure that the glass parts are in perfect condition with-

out any scratches, and/or dents. If any type of breakage and/or other imperfection is

A licensed and professional contractor has to comply with the required specifications and dimensions

illustrated on this diagram during installation and technical maintenance of the product.

After installation use the shower door for approximately 2-3 weeks or 20-25 times (whichever

comes first). After that be sure to re-inspect all screws, make sure they are tight and tighten them

if necessery. Repeat the adjustments if necessary.

By installing and operating this product the installer and the owner of the product acknowlage,

understand, and agree to follow all of the installation and technical mainatance procedures and/or

policies described in this installation instructions manual including this page. If you do not under-

stand or agree to any or all of these instructions or policies do not install or operate the product.

Failure to follow and/or comply with any or all of the instructions and policies will void any warranty

of the product and will automatically removes any and all liability from manufacturer and/or distribu-

tors of the product.

EXTREMELY IMPORTANT INSTALLATION

& TECHNICAL MAINTANCE INSTRUCTIONS!