Installation Guide

www.lesscare.com
ULTRA-C
SHOWER ENCLOSURES
INSTALLATION STEPS
37
Figure 33
a.
b.
c. d.
17. Install the Anti-Splash Threshold
Pull out the Cover in the guide block (13), put the Anti-Splash Threshold (9) to the slot of the Guide Block, in
front of the Glass Door (7) on the shower tray or threshold. Put the Threshold Cover (11) to the end of the
Threshold against the wall. Mark a drill hole on a threshold with a pencil. Drill the hole on a threshold with
drill bit 8mm (5/16"). Attach the threshold and mark a drill hole on a shower base. Drill a hole in a shower
base (refer to figure f. for drill bit size). Apply silicone into the holes, insert the Wall Anchors (14). Apply the
silicone along the bottom of the Anti-Splash Threshold and the slot on the Guide Block. Now put the
Anti-Splash Threshold and the cover back to its position, now secure the Cover to the shower tray or thresh-
old with M4x45 screws (10).
Please see Fig 33 ( A to i)
Outside
Outside
Outside
Outside
13A
13B
11
13
9
11
9