Installation Guide

www.lesscare.com

ULTRA-C

TUB DOORS • SHOWER DOORS

INSTALLATION STEPS

Figure 15

15. Adjust the Roller(5) and locate the Glass Door Stopper(3)

15.1. Adjust the fasteners on both Rollers (5) to ensure that the bottom edge of the Glass Door (7) will not touch the bottom of

the Guide Block (13).

NOTE: Glass Door can be adjusted up or down for 2mm by adjusting the fasteners on the Rollers.

15.2. Push the Door Stopper(3) close to the wall side, slide the Glass Door to make roller contact to the Stopper and get the

perfect space then lock the stopper screw.

NOTE: Make sure that the stoppers are lock tightly to the roller bar.Please make sure that the Glass Door especially the door

corners will not hit the walls when closed and opened

Please see Fig 15 for details

Inside