Installation Guide

Figure 2

www.lesscare.com

ULTRA-C

SHOWER DOORS

INSTALLATION STEPS

2. Your Upper Guide Rail (3) has been precut for your

Shower model opening width 72" for shower width. If

W-width of your wall-to-wall opening is equal to the size of

your Shower model, it is unnecessary to cut the Upper Guide

Rail and you can continue to Step 3. If W-width of your

wall-to-wall opening is less than the size of your Shower

model, you will need to cut the Upper Guide Rail from the

end which is farther from the Glass brackets (17).

The length to cut off will be L:

L=Subtract W from the size of your Shower

model.

See Fig. 2 for details.

FOR EXAMPLE

If your wall opening W=71”. Your shower

model is 72”.

L=72”-71”=1”,

You have to cut 1” off from the rail.

Note: The Glass Bracket(17) has been pre-installed to the Upper Guide Rail(3).