Installation Guide

www.lesscare.com

ULTRA-C

SHOWER ENCLOSURES

INSTALLATION STEPS

Figure 28

15. Adjust the Rollers(5) and locate the Glass Door Stoppers(3)

Adjust the fasteners on both Rollers (5) to ensure that the bottom edge of the Glass Door (7) will not touch the

bottom of the Guide Block (13).

NOTE: Glass Door can be adjusted up or down for 2mm by adjusting the fasteners on the Rollers.

Push the Door Stopper(3) close to the wall side, slide the Glass Door to make roller contact to the Stopper and get

the perfect space then lock the stopper screw.

NOTE: Make sure that the stoppers are lock tightly to the roller bar.Please make sure that the Glass Door especially

the door corners will not hit the walls when closed and opened

Please see Fig 28 for details