Installation Guide

a.
b.
c.
d.
e.
Figure 17
www.lesscare.com
ULTRA-D
TUB DOORS • SHOWER DOORS
INSTALLATION STEPS
22
3
16
16
16
16
16. Adjust the Rollers(16) and locate the Glass Door
Stopper(3)
15.1. Adjust the fasteners on both Rollers (16) to ensure
that the bottom edge of the Glass Door (6) will not touch
the bottom of the Guide Block (10).
NOTE: Glass Door can be adjusted up or down for 2mm by
adjusting the fasteners on the Rollers.
15.2. Push the Door Stopper(3) close to the wall side, slide
the Glass Door to make roller contact to the Stopper and
get the perfect space then lock the stopper screw.
NOTE: Make sure that the stoppers are lock tightly to the
roller bar.
Please make sure that the Glass Door especially the door
corners will not hit the walls when closed and opened
Please see Fig 17 for details