Installation Guide

Figure 2

www.lesscare.com

ULTRA-D

SHOWER DOORS

INSTALLATION STEPS

2. Your Upper Guide Rail (2) and Anti-Splash Threshold (7)

has been precut for your Shower model opening width: 72"

for shower width. If W-width of your wall-to-wall opening is

equal to the size of your Shower model, it is unnecessary to

cut the Upper Guide Rail and you can continue to Step 3. If

W-width of your wall-to-wall opening is less than the size of

your Shower model, you will need to cut the Upper Guide

Rail from the end which is farther from the Glass brackets

(1) and Anti-Splash Threshold.

The length to cut off will be L:

L=Subtract W from the size of your Shower

model.

See Fig. 2 for details.

FOR EXAMPLE

If your wall opening W=71”. Your shower

model is 72”.

L=72”-71”=1”,

You have to cut 1” off from the rail.

Note: The Glass Bracket(14) has been pre-installed to the Upper Guide Rail(2).