Installation Guide

www.lesscare.com

ULTRA-D

SHOWER ENCLOSURES

INSTALLATION STEPS

Figure 2

2. Your Upper Guide Rail (4) has been precut for your

Shower model opening width: 48" or 60" for shower width.

If W-width of your wall-to-wall opening is equal to the size

of your Shower model, it is unnecessary to cut the Upper

Guide Rail and you can continue to Step 3. If W-width of

your wall-to-wall opening is less than the size of your

Shower model, you will need to cut the Upper Guide Rail

from the end which is farther from the Glass brackets (16).

The length to cut off will be L:

L=Subtract W from the size of your Shower

model.

Remark: With the Return Panel Installed, you need to cut

the roller bar 1/2” at least.

See Fig. 2 for details.

FOR EXAMPLE

If your wall opening W=47”. Your shower

model is 48”.

L=48”-47”=1”,

You have to cut 1” off from the rail.

Note: The Glass Bracket (18) has been pre-installed to the Upper Guide Rail (4).

Attention: Please cut the guide rail from this side, which is farther

side from the hole of the guide rail bracket.